Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Unusual part to break on my snowblower?

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
snowmachine


http://tinyurl.com/ycpofhk

Location: Washington State
Joined: Nov 12, 2008
Points: 267

Unusual part to break on my snowblower?
Original Message   Jan 19, 2020 3:54 pm
I've had my 2008 Craftsman (Husky) 14.5 Torque Rating B&S Snow Blower 881063 (881060) since new. I had a failure today I don't really see reported. Other than that been a good reliable blower. The control rod (16) for the augur activation snapped off right about at rod level just above where the rod mounts to 66. Cheap part but on order.... at least it broke toward end of job. I guess just metal fatigue after more than a decade of moderate use.

[16] https://photos.app.goo.gl/uejWejFSHu6CVE5Z9

[66] https://photos.app.goo.gl/Y9gE8CEUooY2Fkof9

PN: AYP 532406109 or 406109

https://www.ereplacementparts.com/control-shaft-kit-p-670693.html

https://www.ereplacementparts.com/images/part_p_670693_1318308133.gif

This message was modified Jan 19, 2020 by snowmachine


Replies: 1 - 1 of 1View as Outline
FrankMcGuire


Joined: Dec 17, 2020
Points: 1

Re: Unusual part to break on my snowblower?
Reply #1   Dec 17, 2020 4:16 am
Hello. The same question right now with my Husqvarna . Did you find the reason?
This message was modified Dec 18, 2020 by a moderator
Replies: 1 - 1 of 1View as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2021 AbbysGuide.com. All rights reserved.
Site by Take 42