Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I have a Craftsman 2 Stage Snowblower.  I got a rubber toy stuck in the impeller (stage 2).  The rubber dog toy is jammed really tight bewteen the impeller blade and the metal wall (about a 3/8" gap).  Now....I need some suggestions on how to remove it.

Here is what I gathered up so far online, please let me know if I'm missing anything to be safe

- Remove key, pull spark plug so it cannot start

- Pull the shear pins out, so that the augers don't release stored up energy and get my hand once the item is out (is stored up energy a big issue?)

- Cut the toy out using a small hack saw or sharp blade

Just want to make sure I have everything covered so it's safe.  Let me know if anyone has any tips.  This rubber toy is jammed very tight in the impeller...doesn't budge at all.

Thank you NickM!!! My snowblower sucked up a rubber stepping stone that was totally jammed between the auger and the casing. I used my reciprocating saw to cut it up and I'm back in business!!

Flame is dangerous! Raise the front of the blower grap a vise-grip on the rubber toy then pour a few bucket of boiling water on the toy until It smooth out, It will come off easy. Good luck Denis