Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > synthetic oil again...oops

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
snowshoveler


tides in dirts out surfs up

Location: bridgewater nova scotia...aka the swamp
Joined: Jan 3, 2003
Points: 1261

synthetic oil again...oops
Original Message   Feb 9, 2005 5:37 pm
been reading about oils and even posting about it lately .so i decided to do a bit of investigating.

picked up my latest briggs update manual... 2004 vintage.

and inside was a nice bragg about their synthetic oil.

they say they are at the time of printing the only ones selling a synthetic oil for air cooled engines.and they go on to whine about how much better it is when your engine is hot .

every other synthetic oil is supposedly for liquid cooled engines.

so folks im curious ,what does your bottle of synthetic oil say on the side.

lets hear about it

later chris

ps my snowblower just has regular 5w30 and its fine. 

craftsman 10/28 snowblower with tracks   husky 372xpg chainsaw   sachs dolmar bc212 bushsaw   mondo trimmer   monster tractor with trailer    cheep wheelbarro and couple shovels and a partridge in a pear tree 
Replies: 1 - 10 of 12NextNext page of topicsAllView as Outline
robmints


Joined: May 13, 2003
Points: 4691

Re: synthetic oil again...oops
Reply #1   Feb 9, 2005 6:32 pm
• Creates a gentle warming sensation on contact
• Helps Enhance Intimacy


K-Y® Brand Warming Liquid is a unique personal lubricant that creates a gentle warming sensation on contact. Discover a whole new world of intimacy. K-Y® Brand Warming Liquid is water soluble and compatible with latex condoms.

Oops, wong bottle.

It says. api ch-4/cg-4/cf/sj/sh

Withstands extreme temperatures

Lowest friction coefficient available

Highest film-strength available

Greatest viscosity shear protection available

Increases engine durability

Excellent low-temperature flow

I think I may be missing the point Briggs is trying to make.

snowshoveler


tides in dirts out surfs up

Location: bridgewater nova scotia...aka the swamp
Joined: Jan 3, 2003
Points: 1261

Re: synthetic oil again...oops
Reply #2   Feb 9, 2005 7:03 pm
briggs says theirs is the only stuff for an air cooled engine ...

supposedly nothing else will take the heat.

i dont know ...

just know that the oil in small engine regularly reaches over 400 degrees

later chris

craftsman 10/28 snowblower with tracks   husky 372xpg chainsaw   sachs dolmar bc212 bushsaw   mondo trimmer   monster tractor with trailer    cheep wheelbarro and couple shovels and a partridge in a pear tree 
robmints


Joined: May 13, 2003
Points: 4691

Re: synthetic oil again...oops
Reply #3   Feb 9, 2005 9:45 pm
chris,
I just read your other posts from the other thread. I'm not going to try to convince you that a proper grade of quality synthetic oil is better than a similar conventional oil. But I believe a quality synthetic to be so far superior, there is no comparison. Too much personal practical experience and anecdotal  experiece of trusted friends to think otherwise.
Blue9R


Location: Illinois
Joined: Dec 20, 2003
Points: 224

Re: synthetic oil again...oops
Reply #4   Feb 10, 2005 1:28 am
I did some poking around & found a MSDS sheet for the Briggs 5W-30 synthetic engine oil.

http://www.briggsandstratton.com/miscpdfs/RNT/MSDS%20synthetic%205w30.pdf

It's a PAO synthetic and I wouldn't be surprised at all if it had some additional additives to help with the temps in an air cooled engine.  But  I would really doubt that it would be significantly better than Amsoil or Mobil M1 synthetic oil, if tested for consumption over a moderate service period, of say 10 to 25 hours.

While the combustion chamber temps of an air-cooled 4 cycle are over 400 Fdegrees, on a practical basis, the oil in the sump is more in the 200F to 250F range.

Per the MSDS sheet, this Briggs synthetic oil has a flash point of 430 degrees F, which actually is a bit curious, as  M1 5W-30 is slightly higher at 435 degrees F.

Either way, any PAO based synthetic engine oil will be rated excellent for high temperature volatility.

Marshall


As Long As There Are Tests, There Will Be Prayer In Public Schools. ;- )

Joined: Sep 16, 2002
Points: 7730

Re: synthetic oil again...oops
Reply #5   Feb 10, 2005 9:05 am
I'll take Mobil 1 everytime. 
Emmo


Joined: May 22, 2003
Points: 1065

Re: synthetic oil again...oops
Reply #6   Feb 10, 2005 10:41 am
I guess if its good enough for this:



17,500 RPM Test
The Mercedes-Benz Formula 1 engine is an amazing device. Although specific information
is protected better than many government secrets, this 3.0-liter
V-10 engine produces something in the neighborhood of 800 horsepower and can rev on the high side of 17,500 rpm.

Naturally, Team McLaren Mercedes uses Mobil 1.


I'ts probably good enough for this:


Marshall


As Long As There Are Tests, There Will Be Prayer In Public Schools. ;- )

Joined: Sep 16, 2002
Points: 7730

Re: synthetic oil again...oops
Reply #7   Feb 10, 2005 10:45 am
 You think? 
Marshall


As Long As There Are Tests, There Will Be Prayer In Public Schools. ;- )

Joined: Sep 16, 2002
Points: 7730

Re: synthetic oil again...oops
Reply #8   Feb 10, 2005 11:00 am
Four cycle motorcycle engine Mobil 1. How about flash points from 487 to 518 degrees F. Last time I checked my bikes have all been air cooled.


Typical Properties

Mobil 1 Motorcycle Oils

MX4T

V-Twin

MX2T
Product Number48138-248139-048140-8
Engine/Application Type4-Cycle4-Cycle2-Cycle
SAE Grade10W-4020W-50N/A
Service ClassificationAPI SH, SG/CFAPI SH, SG/CFAPI TC, JASO FC, ISO-L-EGD (proposed)
Gravity, API30.529.429.1
Density, lb/gal @ 60°F7.287.337.35
Flash Point (ASTM D92), °C (°F)253 (487)270 (518)88 (190)
Pour Point, °C (°F)-54 (-65)-51 (-60)-42 (-44)
Viscosity   
Kinematic, cSt @ 40°C86.0130.090
Kinematic, cSt @ 100°C13.817.713.7
Cold Cranking, cP2900 @ -20°C2930 @ -10°CN/A
Pumping, cP11500 @ -30°C8500 @ -20°CN/A
Viscosity Index164150152
JohnEDavies


Joined: Sep 7, 2004
Points: 177

Re: synthetic oil again...oops
Reply #9   Feb 10, 2005 11:19 am
Any high quality dino oil works fine in air cooled engines. I have used Castrol GTX for decades without issues in air cooled motorcycles and power equipment.

B&S' statements are BS.

John
snowshoveler


tides in dirts out surfs up

Location: bridgewater nova scotia...aka the swamp
Joined: Jan 3, 2003
Points: 1261

Re: synthetic oil again...oops
Reply #10   Feb 10, 2005 6:47 pm
now calm down guys ...

i was just posting about what briggs had put in there update.

that synthetic oil of theirs isnt even available in our little part of the world.

the only reason i have the dino oil in my snowblower is because its a kaboom engine and its got a short life expectancy.

and then ill be putting on an ohv somthing or other we have hondas ,noname honda look a like s and briggs and soon to get mitsubishi and a bunch of other stuff including kawasaki.

i would really like on of those 15 horse v twin kawi engines. that would just about make me happy.

anyway when i get a new engine i will for sure use the synthetic oil ,im sold i use the synthetic mix oil in my big butt husky chainsaw.

its just not worth it for every engine out there,it might keep my old kaboom going forever and then i couldnt replace it ,know what i mean.

later chris  

craftsman 10/28 snowblower with tracks   husky 372xpg chainsaw   sachs dolmar bc212 bushsaw   mondo trimmer   monster tractor with trailer    cheep wheelbarro and couple shovels and a partridge in a pear tree 
Replies: 1 - 10 of 12NextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42