Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Ccr2000 38186
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
Mikeincalgary
Joined: Jan 15, 2014
Points: 4
![]()
|
 |
Ccr2000 38186
Original Message Jan 15, 2014 7:02 am |
|
Hi having start problems with my toro ccr2000 model 38186 serial 4900000 series. I have read about the stens mega fire fix for the 38180 model. I have taken a look at the toro diagrams and the 38186 model looks like it does not use the toro xstar module that I could replace with the stens part. Is this correct? Thanks
This message was modified Jan 27, 2014 by a moderator
|
Mikeincalgary
Joined: Jan 15, 2014
Points: 4
![]()
|
 |
Re: Ccr2000 38186
Reply #3 Jan 16, 2014 10:29 pm |
|
Thanks will be testing things out this weekend
|
Mikeincalgary
Joined: Jan 15, 2014
Points: 4
![]()
|
|
|
Re: Ccr2000 38186
Reply #4 Jan 18, 2014 11:47 pm |
|
Thought I would try firing it up first. Started easy, let it run five min no issue. Shut it down for five min , then started on first. Will try again tomorrow. My guess is operator (wife) error before. It stalled on her after 20 min and she kept priming it - my guess is she really flooded it.
|
Mikeincalgary
Joined: Jan 15, 2014
Points: 4
![]()
|
|
|
Re: Ccr2000 38186 (TOP OF THE WEEK)
Reply #5 Jan 20, 2014 8:13 pm |
|
Spoke to soon. Fired it up the day after . Started backfiring then stalled out. Did that a few times.
|
|
|
