Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Have a 932105 ST8526LE and it's easy to get after market belts locally. 


Not wanting to change them again anytime soon, should I do that or order the OEM online?


The auger belt is slipping and I'm going to try adjusting the tension roller, but expect to change out the belts when all's said and done.

I replaced the auger belt with another Ariens 07200007 and watched it run awhile without the plastic cover in place.

There's considerable strain on the outer edge of the belt as the tension pulley engages, and the whole belt seems stressed as it engages.  Once engaged, it seemed to run fine with perfect alignment.

Is there a belt designed to handle the smoking, grind down effect as the tension pulley engages?  It reminds me of smoking racecar tires taking off....   and is it preferable to quickly engage the belt via the handlebar lever, or slowly let it grab?

Eating this belt is the one weak part of this machine, besides being a bear to handle, and I have changing it down to a quick science but if there's something I can do to minimize belt wear would jump on the chance.  There's always one spot on the belt that just heats up, smoulders, smokes, and causes slippage and the auger not to turn.  When the belt is removed it looks like an iron was put on one part of the "V".  Tempted to try some of that sticky belt dressing just to see if it helps.

grump wrote: I have noticed on my 3 year old Ariens that when I enage the auger it sounds harsh........I wonder too what is the best way to engage it quickly or slowly? Any thoughts?

The best thing for the belt would be to throttle the engine down, engage the auger and then throttle the engine back up. Now, that probably isn't the most practical scenario of you are engaging and disengaging quite often.