Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Steering system Husky Power Steering vs Toro OXE

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
Norfolker


Joined: Oct 10, 2011
Points: 6

Steering system Husky Power Steering vs Toro OXE
Original Message   Oct 10, 2011 12:50 pm
Quick intro: From eastern Mass (half way between Boston and Providence RI). Need to invest in a snow blower that is robust yet easy to steer - well, one that has a good steering system. I'm about to have L4 & L5 vertebrae fused and during the healing process will need a blower that won't make me screw things up by bulling it around. Anyway, been doing a lot of research (lots of free time - disabled from work until back is fixed) and I am narrowing my search down to the Toro's OEX's (Power Max 826OEX, 828OEX, or 1028 OEX) and the Husky with power steering and the high impeller speed (11524E & 14527E) Questions, how do these steer? At this point that is the priority, I will tackle the other differences later. OR do you know of a RELIABLE machine that needs no body twisting or pulling to steer it. (I read reports that Troy-Bilt have unreliable reverse gears) thanks -Bill
This message was modified Oct 10, 2011 by Norfolker
Replies: 59 - 59 of 59Next page of topicsPreviousAllView as Outline
RobertL


Joined: Nov 5, 2011
Points: 10

Re: Steering system Husky Power Steering vs Toro OXE
Reply #59   Nov 11, 2011 9:06 pm
JoelKlein wrote:
"Great News" I Swapped the Husqvarna for a..........Toro........yes yes yes....the big brother 1028 OXE! paid the extra $300.00 and got on friday. I did notice thou, the joy stick moves the the chute around very easy, Too easy, and it swings on its own, i can't get it to stay "looked" in the 1 o'clock possition, hard right or left it holds, but not off center. is it a adjustment? Thanks

Remove the cover just behind the chute,.  Use a nutdriver,  Ensure that when you "press" the joystick button, the gear under the removed cover becomes unlocked, allowing the chute to move...The cable is installed at the factory..
This message was modified Nov 11, 2011 by RobertL
Replies: 59 - 59 of 59Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42