Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Toro 824 power shift snow blower

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions
Search For:
clifford


Joined: Feb 4, 2010
Points: 13
Toro 824 power shift snow blower
Original Message   Feb 4, 2010 7:01 pm
My belt kept coming off of my snow blower , I looked and the pulleys dont line up.Investigating this I noticed that the shaft in the front was coming in and out of the gear box.About a inch and a half. Can some one help me with this. Thanks
This message was modified Feb 4, 2010 by clifford
Replies: 23 - 24 of 24Next page of topicsPreviousAllView as Outline
tomjv


Location: North East
Joined: Jan 28, 2011
Points: 2
Re: Toro 824 power shift snow blower
Reply #23   Jan 28, 2011 9:14 am
Nice pics . . . where's the grease on that gear?  That thing should be swimming in Mag1 Lubriplate Toro part number 505-101.

TomJV
jimbedro


Location: Maynard MA
Joined: Feb 20, 2009
Points: 52
Re: Toro 824 power shift snow blower
Reply #24   Jan 28, 2011 7:29 pm
tomjv wrote:
Nice pics . . . where's the grease on that gear?  That thing should be swimming in Mag1 Lubriplate Toro part number 505-101.

TomJV


The requirement for the auger gearbox is GL-5 or GL6 SAE 85-90 EP transmission oil. Do not use synthetic gear oil. This directly from the Toro powershift 824 operator manual.
Replies: 23 - 24 of 24Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42