Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Ariens ST1332LE 32"
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
goatman68
Location: Wisconsin
Joined: Nov 8, 2009
Points: 19
![]()
|
 |
Ariens ST1332LE 32"
Original Message Jan 21, 2011 11:12 am |
|
Hello all, This is my second season with my Ariens ST1332LE 32" and this thing is a handfull. I am wondering if anyone is running chains on their 32" blowers. This is a trigger model that has both wheels locked. The thing never wants to go perfectly straight, I am always trying to hold it in a straight line. I guess my thought was that chains might solve that problem. It is a 2008 model.
Simplicity 990430 24" (vintage 1968) Ariens ST1332LE 32" |
Surfs_up_Today
Joined: Jan 7, 2009
Points: 2
![]()
|
 |
Re: Ariens ST1332LE 32"
Reply #5 Jan 27, 2011 7:33 pm |
|
Nobody runs chains. Chains used to be popular many years ago when snowblower tires had 1/'4 inch and 1/2 inch treds. Now tires have 2 inch treads with big spaces. I have a very very very steep driveway and have never had a problem. When I got my Ariens 1332 I was freeked out how much it was pulling to the side. That was three years ago....once I adjusted it, it was fine. Now it spins on a dime, it feels SMALL, in any snow condition. But there is one important adustment you must make (if it is off). Study the book, but I will try here from memory. The unit comes it two big pcs...two halves....they are the Engine/Wheels and the other half is the Front Auger. If the conecxtion of these two halves is twisted or not alinged, it will pull. THis was the problem with mine. Do the following: Find a flat smooth surface. Loosen the all the hardware that touches the ground (scraper bar and the two side guides) Wiggle the machine and look at it from the front. You are trying to see if the two major halfs of the snowblower ( Engine + Auger )are aligned. If the auger is $#%* eyed, you are going to have to fix this adjustment (not too difficult). If it is cockeyed, just to make shure, move the machine to another flat surface in case your first flat surface wasn't really flat. If it is still cockeyed, you need to read your manual on how to change the belts. One of the belt replacements REQUIRES you to seperate the two big pcs of the machine (Engine and Auger). So read that, don't actually pull the two parts apart, but just loosen the bolts, re-align, and now adjust the scaper bar and whatever those guides are called on the sides. (previous authors in this thread talked about that). You then will be good to go. Good luck! |
goatman68
Location: Wisconsin
Joined: Nov 8, 2009
Points: 19
![]()
|
 |
Re: Ariens ST1332LE 32"
Reply #7 Jan 28, 2011 10:47 pm |
|
I have a trigger lock model as well. When both wheels are locked it runs straight. With only one wheel locked it pulls to the side. Are you sure that the trigger mechanism is working properly and locking both wheels? If not there's your problem. Yes, trigger lock is working fine, when unlocked it goes nowhere......
Simplicity 990430 24" (vintage 1968) Ariens ST1332LE 32"
|
goatman68
Location: Wisconsin
Joined: Nov 8, 2009
Points: 19
![]()
|
|
|
Re: Ariens ST1332LE 32"
Reply #8 Jan 28, 2011 10:50 pm |
|
Nobody runs chains. Chains used to be popular many years ago when snowblower tires had 1/'4 inch and 1/2 inch treds. Now tires have 2 inch treads with big spaces. I have a very very very steep driveway and have never had a problem. When I got my Ariens 1332 I was freeked out how much it was pulling to the side. That was three years ago....once I adjusted it, it was fine. Now it spins on a dime, it feels SMALL, in any snow condition. But there is one important adustment you must make (if it is off). Study the book, but I will try here from memory. The unit comes it two big pcs...two halves....they are the Engine/Wheels and the other half is the Front Auger. If the conecxtion of these two halves is twisted or not alinged, it will pull. THis was the problem with mine. Do the following: Find a flat smooth surface. Loosen the all the hardware that touches the ground (scraper bar and the two side guides) Wiggle the machine and look at it from the front. You are trying to see if the two major halfs of the snowblower ( Engine + Auger )are aligned. If the auger is $#%* eyed, you are going to have to fix this adjustment (not too difficult). If it is cockeyed, just to make shure, move the machine to another flat surface in case your first flat surface wasn't really flat. If it is still cockeyed, you need to read your manual on how to change the belts. One of the belt replacements REQUIRES you to seperate the two big pcs of the machine (Engine and Auger). So read that, don't actually pull the two parts apart, but just loosen the bolts, re-align, and now adjust the scaper bar and whatever those guides are called on the sides. (previous authors in this thread talked about that). You then will be good to go. Good luck! Thanks for the idea, never thought two halves could be misaligned.............
Simplicity 990430 24" (vintage 1968) Ariens ST1332LE 32"
|
PartsMan
Joined: Jan 28, 2011
Points: 7
![]()
|
|
|
Re: Ariens ST1332LE 32"
Reply #9 Jan 28, 2011 10:51 pm |
|
Thanks guys, I'll try that first. So no one is running chains?? The only time you need to use chains is if your tires are spinning. They sure won't hurt and you will have better grip with them. You can find some good deals on chains and lots of other aftermarket parts on this site www.c-equipment.com
|
goatman68
Location: Wisconsin
Joined: Nov 8, 2009
Points: 19
![]()
|
|
|
Re: Ariens ST1332LE 32"
Reply #10 Jan 28, 2011 10:53 pm |
|
Thanks everyone for your suggestions. I am going to work on it tomorrow since we are getting snow tonight.............. I will let all know what the outcome was.... Rick
Simplicity 990430 24" (vintage 1968) Ariens ST1332LE 32" |
goatman68
Location: Wisconsin
Joined: Nov 8, 2009
Points: 19
![]()
|
|
|
Re: Ariens ST1332LE 32"
Reply #13 Jan 29, 2011 10:58 am |
|
Did you mean that literally...as in "no wheels turn". With the trigger unlocked the right side wheel should turn. "Right side" from standing behind the unit. With the trigger locked BOTH wheels should turn. No, not literally, right side still turns, but not much for traction.....
Simplicity 990430 24" (vintage 1968) Ariens ST1332LE 32"
|
goatman68
Location: Wisconsin
Joined: Nov 8, 2009
Points: 19
![]()
|
|
|
Re: Ariens ST1332LE 32"
Reply #14 Jan 29, 2011 11:08 am |
|
When I got my Ariens 1332 I was freeked out how much it was pulling to the side. That was three years ago....once I adjusted it, it was fine. Now it spins on a dime, it feels SMALL, in any snow condition. But there is one important adustment you must make (if it is off). Study the book, but I will try here from memory. The unit comes it two big pcs...two halves....they are the Engine/Wheels and the other half is the Front Auger. If the conecxtion of these two halves is twisted or not alinged, it will pull. THis was the problem with mine. Do the following: Does your 1332 have the Tecumseh engine?? Reason I ask is mine is alittle low on power, I think it is jetted too lean. When it comes out of a heavy load the governor surges and even backfires through the carb. When it is warmer out (ie) 25-30* its not as bad, but when it is near 0* the air is dense and the problem is worse. It is low on power when going through 8-10" of snow, and that is even with it in low gear. I am thinking of jetting it up 2 notches if the jets are even available and I think that will give it alittle more power.
Simplicity 990430 24" (vintage 1968) Ariens ST1332LE 32"
|
|
|
