Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > craftsman snowblower light

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
tombraider


Joined: Jun 26, 2006
Points: 1

craftsman snowblower light
Original Message   Jan 8, 2007 7:57 am
I have a 1992 8/24 snowblower passed on to me this year.It works excellent;although we`ve only had minimal snow this year.Can anyone tell me how to hookup a light to this machine. I`ve been examining them on new one a stores, but i don`t know where the connections are made ,or if i need any special parts,or even it can be done.Any,all help is welcome thanx.Reid.
Replies: 23 - 27 of 27Next page of topicsPreviousAllView as Outline
cutter7


Joined: Oct 27, 2010
Points: 2

Re: craftsman snowblower light
Reply #23   Oct 27, 2010 4:49 pm
JasonnB wrote:
Hey again.... Never got around to adding the light last year, so I'm revisting this again. Are these the lights you meant?

http://cgi.ebay.com/ebaymotors/ATV-QUAD-DRIVING-LIGHTS-KAWASAKI-SUZUKI-ARTIC-CAT-BR_W0QQitemZ300335772611QQcmdZViewItemQQptZLH_DefaultDomain_100?hash=item45ed6833c3

ALso, just found this one:

http://www.sears.com/shc/s/p_10153_12605_07133168000P


Also was thinking about adding a snow cab/canopy. I see a lot of univeral ones on ebay, wondering if they are any good?
jason,
don't know if you are still sorting this out or not.  but, I thought I'd pass on what was helpful to me.
I'm pretty sure the light you linked on ebay is not compatible.  they are 55 watt lights -- far in excess of what your snowblower will support.

I used a cheap and really simple solution that someone here and elsewhere suggested (someone named Marty, I think).  anyway, I bought an outdoor landscape light on sale at $5 or so at Menards.  it was rated for either a 20 watt or 10 watt bulb (but, Marty used a 7 watt light and posted that it was very bright).  my snowblower has a tecumseh engine with an 18 watt alternator (per manual).
I added a $2 switch (from automotive dept at Walmart), and wired it all in (specifically, wire with connector pin coming out of alternator to switch, then from other switch lead to light, then other lead from light to ground on engine mount).  the 10 watt bulb works beautifully, but I might switch out to the 20 watt bulb, if I need it. 
I am a very basic diy guy, so this does not demand any complex skills. 

in case you might be wondering: I placed the switch in a recycled AC adapter box (after cutting out a small opening for it) to protect the leads from snow/moisture, and mounted the light itself at a higher elevation than the factory panel between the handlebars (to minimize shadows from the chute).  I did this by using the pre-existing hole in the panel (I presumed for factory-mounted light) to bolt a 12" generic mending bar (~3/16" thick) from Home Depot/Lowes ($2) and then bolting the light onto that at the other end with a pipe-mounting bracket ($0.40).

in retrospect, it makes perfect sense to use the landscape light.  it's designed for outdoor use and exposure to the elements. toss the spike-in-the-ground portion and you have a well-sealed, low-voltage (all this means is essentially 12 volt, not household current), and low wattage (compared to automotive or household appliances) light source ready to be wired. 

anyway, I hope this helps you or someone.  I scoured the boards for a long time, trying to find an easy solution, until I found this.
now, I can't wait for the snow to start falling!  but, indian summer is nice, too.
JasonnB


Location: PA
Joined: Dec 9, 2007
Points: 26

Re: craftsman snowblower light
Reply #24   Dec 31, 2010 11:27 am
Snowmann wrote:
The Tecumseh 18W AC is unregulated. Voltage will depend on current draw. ~18W will get you to 12V which is what you need. 20W is close enough. 27W will brown out... Flood lens with wide pattern is preferable.


Tecumseh alternator... The missing piece of information I want to know is how much current (amps) the thing
can put out???? I want to convert this AC alternator to DC with a 25A bridge to power a DC motor that will make the chute move electricly...
New_Yorker


Preach the Gospel always, use words when necessary

Location: Long Island, NY
Joined: Nov 26, 2010
Points: 219

Re: craftsman snowblower light
Reply #25   Dec 31, 2010 11:48 am
tombraider wrote:
I have a 1992 8/24 snowblower passed on to me this year.It works excellent;although we`ve only had minimal snow this year.Can anyone tell me how to hookup a light to this machine. I`ve been examining them on new one a stores, but i don`t know where the connections are made ,or if i need any special parts,or even it can be done.Any,all help is welcome thanx.Reid.

Make sure the engine has a stator to generate electricity.  If a Sears snowblower didn't have a light on it already, it may not.  Try to research the engine model they have to have made a few million of them.  The lights that can be used don't draw much electricity.  My new Honda accessory light is a 50 Watt Sealed Beam Halogen go to www.pmlights.com and look at the 507 F (F =Flood Pattern)  It has a rubber case designed to both absorb vibration which can ruin bulb filaments, and it also keeps the light weatherproof.  If you want the lower power draw requirements of an LED lamp, the model to choose is the 907 (look under new Products)  To actually buy the lamps go to www.foxtailights.com.  The 507 costs about 30 bucks, the 907 (LED) $72.00 plus freight to you.  To connect just ground the lights base to metal on the machine (the internal light wire connects to the steel mounting base of the 507 or 907), the other wire just connects to the stator connection point on the motor.  I had a Sears MTD model of similar vintage and installed a toggle switch between the light and the engine, otherwise the light is on whenever the engine is running.  good Luck !
JasonnB


Location: PA
Joined: Dec 9, 2007
Points: 26

Re: craftsman snowblower light
Reply #26   Jan 4, 2011 9:35 pm
JasonnB wrote:
I just picked it up. It's a Craftsman 536.887990, made 11/2002, with a Tecumseh engine.  I just went out and started it up, and tested that yellow wire with bullet connector with my Volt meter, and put it to AC volts. It read about 5 volts, but it was idling. I then put it to full throttle and it jumped to about 15 volts, hehe. So, it looks like that's the wire to use :)


How do I find he specs on the Tecumseh alternator I have in my craftsman 536.887990, made 11/2002, with a Tecumseh engine??? I want to know how many amps it puts out, etc...


This message was modified Jan 4, 2011 by JasonnB
cutter7


Joined: Oct 27, 2010
Points: 2

Re: craftsman snowblower light
Reply #27   Jan 14, 2011 11:58 am
JasonnB wrote:

Jason,
I believe you need to locate the Tecumseh engine model to get the answer you need (not the snowblower model, since the Tecumseh engines are mounted on a variety of different makes of snowblowers).  The engine model info is on a sticker or plate directly on the engine. Once you get that, you can search for any particular info you need.  The following are some sites I found useful:

http://www.outdoordistributors.com/Tecumseh/Tecumsehpartslists.html

http://www.cpdonline.com/692509.pdf

http://www.tecumsehpower.com/CustomerService/BSI.pdf


Hope that helps a bit.
Replies: 23 - 27 of 27Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42