Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Toro CCR 2000E Mikuni carb needle valve setting question.

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
trouts2




Location: Marlboro MA
Joined: Dec 8, 2007
Points: 1328

Toro CCR 2000E Mikuni carb needle valve setting question.
Original Message   Mar 27, 2008 8:26 pm
    Picked up a CCR2000E non-starter pretty cheap today.  Took the carb off for a cleaning and got it starting and running well.  But I'm not sure about what the setting should be on carb. 

   The main jet seems fixed but on top is probably a low speed adjust needle.  What is the initial setting for that?

   The Toro parts breakdown does not list the carb number, the carb as an assembly, or the carb body other than "carb body" without a part number.  The engine is a 47pml-5 Suzuki.

ke

Replies: 10 - 10 of 10Next page of topicsPreviousAllView as Outline
brandon08mitchel


Joined: Sep 8, 2010
Points: 1

Re: Toro CCR 2000E Mikuni carb needle valve setting question.
Reply #10   Sep 8, 2010 11:19 pm
I have a Mr Gasket carburetor needle valve and it's perfectly okay. Don't what settings you want but a pic would be a help.
This message was modified Sep 8, 2010 by brandon08mitchel
Replies: 10 - 10 of 10Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42