Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I did a search and found a few references to this machine but no answers.  Any one have one of these?  15.5 snow max engine, heated hand grips, 30" wide.  I can't find a listing for auger diameter or impeller diameter.  I called John Deere and the guy that was suppose to be the snow thrower expert didn't know either. 

What is the Easy Steer drive system?  The literature says: 

Easy Steer® drive system giving continuous power to both wheels and auto speed adjustment

Is it similar to the Ariens auto differential? 

I've heard that the units are built by B&S which translates to Simplicity.  They do have cast iron gear cases like the Simplicity.  The chute control is different than the simplicity and so is the turning method so they are not exactly the same.  I'm trying to compare the Simplicity L1530E to the JD 1130SE.  Any help would be appreciated.

Rick

If we do end up mounting a light on the top of the cab, we can run the wires through the frame to hide them. 

I just looked at ebay.  They have 24 and 48 red LED brake lights that look interesting.

LED would probably be better.  I noticed that the headlight does dim a bit anyways when I turn up the heated grips.  Adding another light wouldn't help any.  It could probably use a LED headlight too to reduce the draw on the power as well. 

I just ordered the 24 light version.  It was $6.94 with shipping.

Can you post the link for the one you ordered?  I'm on eBay now.

Here's what I ordered.

http://cgi.ebay.com/24-LED-Car-Red-Third-Brake-Stop-Tail-Light-Lamp-12V_W0QQitemZ170419659112QQcmdZViewItemQQptZAU_Car_Parts_Accessories?hash=item27adcda168

 

Now I'll get the mount ready and wires routed while I wait for this thing to be sent from China.

I’m also going to use this connector in case I want to remove my cab..

http://www.radioshack.com/product/index.jsp?productId=3870003

OK.  I ordered the light too.  I think I see a way to run the wiring through the frame of the cab.  It looks like I will have to drill a hole in the bottom of the vertical part of the frame (at the bottom where it is welded onto the horizontal part of the frame) to open it up so the wire can be fed up into it though.  I guess the best way to get power is to pigtail off of the headlight wire. 

I ordered one of the connectors too.  eBay

Now I just need to find where I put my extra trailer light wire from when I rewired my boat years ago.