Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > craftsman mod #536882600 snowblower

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
rob711


Joined: Nov 5, 2009
Points: 6

craftsman mod #536882600 snowblower
Original Message   Nov 5, 2009 11:12 am
hi all! i picked up this snow blower from craigslist for 75 bucks..it runs well and everything seems to work..can any one tell me how old it might be..i was told in heavy snow it will throw the auger belt and that it was relplaced but still happens..no snow so i have not had a chance to use it..i ran it on blocks and looked underneath and all seems good..but thats under no load..any tips or thoughts would be great. thank you

rob

Replies: 8 - 8 of 8Next page of topicsPreviousAllView as Outline
rob711


Joined: Nov 5, 2009
Points: 6

Re: craftsman mod #536882600 snowblower
Reply #8   Dec 29, 2009 4:51 pm
turned out the carb was loose..tightened the screw and it runs mint!!  i'm never that lucky..that was great.  i noticed that there is a guide/ pin that looks like its supposed to keep the drive belt from popping off when there is no load on it. its held in place by a bolt that goes into the case of the motor..well thats striped..i'm thinking i'll have to get a helicoil kit to propery fix that..but its still owes me nothing..then i thought jb weld and try put get the bolt back in..we'll see
Replies: 8 - 8 of 8Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42