Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > John Deere 1130 SE

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
Clay


Location: Wis
Joined: Dec 3, 2008
Points: 111

John Deere 1130 SE
Original Message   Jan 7, 2009 1:07 pm
I did a search and found a few references to this machine but no answers.  Any one have one of these?  15.5 snow max engine, heated hand grips, 30" wide.  I can't find a listing for auger diameter or impeller diameter.  I called John Deere and the guy that was suppose to be the snow thrower expert didn't know either. 

What is the Easy Steer drive system?  The literature says: 

  • Easy Steer® drive system giving continuous power to both wheels and auto speed adjustment
  • Is it similar to the Ariens auto differential? 

    I've heard that the units are built by B&S which translates to Simplicity.  They do have cast iron gear cases like the Simplicity.  The chute control is different than the simplicity and so is the turning method so they are not exactly the same.  I'm trying to compare the Simplicity L1530E to the JD 1130SE.  Any help would be appreciated.

    Rick

    Replies: 119 - 128 of 333Next page of topicsPreviousNextNext page of topicsAllView as Outline
    Catt


    Location: Minnesota
    Joined: Oct 16, 2009
    Points: 196

    Re: John Deere 1130 SE
    Reply #119   Nov 7, 2009 9:30 pm
    lanningjw, You did very well.  You got a great price and the updates.  It kind of pi_ _es me off how this has been handled.  Only people that b itch get the update.  This will be a problem eventually for anybody without the updates, but you won't know it until the right conditions occur.  I saw several machines at Lowe's without and the sales people had no clue.  Now I'm going to look forward to winter and I have a new toy to play with.  Good luck with your 1130.  I'm sure you'll have many years of great service and good job making sure you have the latest revisions.
    This message was modified Nov 7, 2009 by Catt
    Ozzie


    Joined: Dec 29, 2008
    Points: 10

    Re: John Deere 1130 SE
    Reply #120   Nov 8, 2009 6:19 am
    Good morning, Ianningjw good for you, hopefully you won't have any problems now that you have had the updates done,  where did you find out about the clutch lever update? now that it has had the update, could you tell the difference from the original lever to the updated one?
    lanningjw


    Location: MINNEAPOLIS, MINNESOTA
    Joined: Oct 8, 2009
    Points: 29

    Re: John Deere 1130 SE
    Reply #121   Nov 8, 2009 7:01 am
    Ozzie, I took the JD from the driveway up into the grass and back to the shed. I thought it was kinda warm out to be playing with the blower. I cannot tell any difference with the updates.

    Why not get them done?
    LennyB


    Joined: Sep 28, 2009
    Points: 9

    Re: John Deere 1130 SE
    Reply #122   Nov 8, 2009 11:29 am
    Sorry about the delay, but I have an update on my 928E that I had talked about earlier.

    I really wanted to have the retro kits (water proofing, and clutch lever kits) in my hands so I could snap a few shots and post them here but the dealer talked me into having the parts installed by him so as to maintain my warranty, blah, blah, blah.

    Looking back, I suppoose it didn't cost me anything nor did I have to spend the time installing the parts.

    Anyway, he told me the seal kit sits right behind the cover to stop the water from sneaking down into the friction disc, and as for the clutch lever, he mentioned that this kit was an update to stop the oil and or grease from contacting the friction disc as it has been mentioned earlier on this thread. Apparently the original hex shaft on the drive wheel was oil impregnated and had to be replaced to halt any contamination onto the friction disc.

    As I said, sorry for not being able to post the photos, but if you have the issues that the other members have experienced, contact your John Deere dealer and start the ball rolling.

    I also want to thank everyone here for making this process so much easier as Lowes did not inform me of any update nor did they offer any assistance in getting my issues resolved. It was the diligence of the people here that made the difference.

    Thanks again guys,
    Len
    Catt


    Location: Minnesota
    Joined: Oct 16, 2009
    Points: 196

    Re: John Deere 1130 SE
    Reply #123   Nov 14, 2009 7:57 pm
    I replaced the original gas cap with a cap fuel gauge for my Deere 1130 SE.  Now I can see how much gas is in the tank with just a glance.
    blackjack3


    Joined: Jan 14, 2009
    Points: 2

    Re: John Deere 1130 SE
    Reply #124   Nov 15, 2009 4:57 pm
    LennyB, What JD dealer did they send you to for the upgrade?I am in the Hamilton area and plan on getting the update for my 08 model.
    LennyB


    Joined: Sep 28, 2009
    Points: 9

    Re: John Deere 1130 SE
    Reply #125   Nov 15, 2009 7:16 pm
    Blackjack,

    I got my machine serviced at Agraturf in Smithville.

    Very easy people to deal with.

    Catt,

    Where did you pick up the fuel gauge, that's a great idea.


    Len
    Catt


    Location: Minnesota
    Joined: Oct 16, 2009
    Points: 196

    Re: John Deere 1130 SE
    Reply #126   Nov 15, 2009 7:49 pm
    This gauge is made for the Briggs Intek engine.  It works great and the red matches the other red controls.

    I ordered mine from here and they shipped it very quick:

    https://www.mowpart.com


    Model Number: 698109



    LennyB


    Joined: Sep 28, 2009
    Points: 9

    Re: John Deere 1130 SE
    Reply #127   Nov 15, 2009 8:50 pm
    Thanks Catt.
    Swoods


    I love all power equipment from lawn mowers to snow blowers. My favorite pieces of equipment are 2 cycle Lawn Boys.

    Location: Elburn, IL
    Joined: Nov 21, 2009
    Points: 65

    Re: John Deere 1130 SE
    Reply #128   Nov 21, 2009 6:53 pm

    Can someone post pics to show what the updated parts looks like?  I have last year's model and am not sure if it has the update installed yet or not.

    Also, on the engine it says 1650.  I thought these only came with the 1550 engine?  It is definitely a 1130se.  Did last year’s model have the 16.5 lb torque engine?


    Sean Woods
    Replies: 119 - 128 of 333Next page of topicsPreviousNextNext page of topicsAllView as Outline
    Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
    AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
    Copyright 1998-2024 AbbysGuide.com. All rights reserved.
    Site by Take 42