Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Heard alot on Murray, MTD (Craftsman) thoughts on Agri Fab?
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
Grigsby
Pants?!
Location: Greater Cleveland Area
Joined: Jan 16, 2005
Points: 5
|
|
Heard alot on Murray, MTD (Craftsman) thoughts on Agri Fab?
Original Message Jan 16, 2005 9:03 pm |
|
I have been lurking here for a few months and have ordered a snow thrower today from Sears. Have to be honest it was simply how much credit that Sears has given me that drove most of my decision. I am a relatively new home owner and have had very good experience so far with Craftsman OPE. I have a 130' asphalt drive with a 30x40 concrete parking space. I also have 300 feet of sidewalk (which I have ignored so far, bad, bad neighbor) that may become 500 in a year or two. I also have had many back and groin injuries which have finally made me admit my limits and driven me to buy another expensive toy/tool. I ordered the Craftsman 071887900 (has Tecumseh, non SnowKing apparently, never been Tec fan anyway) which might have been the focus of the Toro vs Craftsman thread earlier. The model number is supposedly Agri Fab as Mfr. and I wondered if anyone knew about this line. I did not realize until today that every item in my garage from Craftsman that I like (including attachments for Lawn Tractor) have the Agri Fab mfr model number. I don't know much about them or if they are anything more than a shell for Sears. I need to say that MTD at some point was the same as White which was a quality company in the Cleveland area before I was born. They claim that some items coming out under the White name will again be good quality equipment. I won't hold my breath. Well, I went on a bit for my first post. Please, educate me if you can.
Lawn: Craftsman LTX1000 (21 hp B&S Intek V-Twin) Snow: Craftsman #07188790 Generator: Craftsman 5600
|
ChrisS
Appreciate what you have already been blessed with.
Joined: Sep 16, 2002
Points: 2793
|
|
Re: Heard alot on Murray, MTD (Craftsman) thoughts on Agri Fab?
Reply #9 Jan 16, 2005 10:36 pm |
|
You think so? The picture you posted looks like a Murray but that other pic looks like the new MTD auger design this year that Spectrum commented on early this fall. Where is John when you need him lol...Does he still work for Sears? C
Honda 928TA, Ariens 924 STE, Toro single stage S-620, 95 Jeep Wrangler with a 6 foot Fisher Plow, many shovels, one 14 year old boy. Craftsman 01 1000 LTX pimp Gold LT 20hp Briggs OHV V-twin. Tough as it is ugly.
|
Grigsby
Pants?!
Location: Greater Cleveland Area
Joined: Jan 16, 2005
Points: 5
|
|
Re: Heard alot on Murray, MTD (Craftsman) thoughts on Agri Fab?
Reply #10 Jan 16, 2005 10:44 pm |
|
I don't have the number messed up or altered Check it here and have found a few sites listing the 071 prefix as Agri Fab Here and Here. I don't pretend to know for certain. Hopefully I set the links correctly.
Lawn: Craftsman LTX1000 (21 hp B&S Intek V-Twin) Snow: Craftsman #07188790 Generator: Craftsman 5600
|
Grigsby
Pants?!
Location: Greater Cleveland Area
Joined: Jan 16, 2005
Points: 5
|
|
Re: Heard alot on Murray, MTD (Craftsman) thoughts on Agri Fab?
Reply #11 Jan 16, 2005 10:47 pm |
|
Heck, am I looking at the wrong number this whole time? I am just regurging site info rather than checking on the blower which I can't do until I have it. Sorry if it is just so far off.
Lawn: Craftsman LTX1000 (21 hp B&S Intek V-Twin) Snow: Craftsman #07188790 Generator: Craftsman 5600
|
Grigsby
Pants?!
Location: Greater Cleveland Area
Joined: Jan 16, 2005
Points: 5
|
|
Re: Heard alot on Murray, MTD (Craftsman) thoughts on Agri Fab?
Reply #12 Jan 16, 2005 10:59 pm |
|
I don't know. I found more links Link like this one showing full mowers and other similar devices along with Sears giving awards to Agri Fab as one of their top partners this last year. Set me straight. I will hold my crazy uninformed posts until later. Too much energy for 11pm.
Lawn: Craftsman LTX1000 (21 hp B&S Intek V-Twin) Snow: Craftsman #07188790 Generator: Craftsman 5600
|
ChrisS
Appreciate what you have already been blessed with.
Joined: Sep 16, 2002
Points: 2793
|
|
Re: Heard alot on Murray, MTD (Craftsman) thoughts on Agri Fab?
Reply #14 Jan 16, 2005 11:04 pm |
|
I still think it is MTD made. The model # on the frame will ultimately tell the tale. C
Honda 928TA, Ariens 924 STE, Toro single stage S-620, 95 Jeep Wrangler with a 6 foot Fisher Plow, many shovels, one 14 year old boy. Craftsman 01 1000 LTX pimp Gold LT 20hp Briggs OHV V-twin. Tough as it is ugly.
|
|
|