Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > belts slipping on my toro model 7/24 snowthrower

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions
Search For:
topgun


Joined: Feb 12, 2008
Points: 2
belts slipping on my toro model 7/24 snowthrower
Original Message   Feb 12, 2008 6:30 pm
I need help on adjusting the auger belt on my toro model 7/24 that I do not have a manual for.
Replies: 1 - 2 of 2View as Outline
pare_john


Joined: Nov 4, 2007
Points: 31
Re: belts slipping on my toro model 7/24 snowthrower
Reply #1   Feb 12, 2008 6:57 pm
More tension needs to be put on the tensioner. You can do this by adjusting the auger control lever. You will see a clevis between the rod and the tensioner lever. There is a nut you loosen to turn the clevis to apply more tension.

This message was modified Feb 12, 2008 by pare_john
topgun


Joined: Feb 12, 2008
Points: 2
Re: belts slipping on my toro model 7/24 snowthrower
Reply #2   Feb 13, 2008 10:52 am
Thank you for your help, I will also try to locate a manual for the machine. Again THANK YOU!
Replies: 1 - 2 of 2View as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42