Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > tecumseh 5hp throttle problems

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
carsrus


Joined: Dec 5, 2007
Points: 3

tecumseh 5hp throttle problems
Original Message   Dec 5, 2007 8:11 pm
Hey guys,
I have a 5hp Tecumseh Snowking on a older Murray blower. Ive been working on this machine for a couple months now as i acquired it in pretty bad shape. Well the little "shutter" i think it is called that moves the throtle was rusted to the carb. Some wd 40 and it started moving freely. The problem is, the rpms were to low. I could move the lever to the high (rabbit) position and she would be at a pretty medium rpm. If i would move it manually she would run great.  I screwed around with it for a few days and moved the spring from the governor rod to the lever. it still woudl run pretty slow so today after not begin able to blow the snow I unscrewed and moved around the governor (the thing screwed to the block?) and got the engine working pretty good. The problem is with the engine off when i move the lever on the slow position the throttle is on the idle speed screw, move it to the fast position it is all the way open. Now heres the problem, shes running so fast with the throttle all the way open im afraid it may blowup. Does anybody know how far the throttle should be open with the lever all the way up? I adjusted the high speed screw to and she runs pretty smooth even at the higher rpm.

Does anybody know how to readjust the throttle? I looked at guides to readjust the governor but I really dont want to grenade the engine with all this time and $$$ put into this blower.

Thanks alot, Dave
Replies: 1 - 2 of 2View as Outline
donjag


i've gone to find myself,if i'm here when you arrive,keep me here until i get back.

Location: menasha,wisconsin
Joined: Apr 25, 2007
Points: 142

Re: tecumseh 5hp throttle problems
Reply #1   Dec 5, 2007 8:29 pm
is the governer hooked up?if you could post a pic

carsrus


Joined: Dec 5, 2007
Points: 3

Re: tecumseh 5hp throttle problems
Reply #2   Dec 5, 2007 9:11 pm
Yes i do. Sorry about the poor quality, its pretty cold here in Chicago and were expecting a few more inches tomorow..

http://i249.photobucket.com/albums/gg235/carsrus2/DSC02686.jpg

The silver screw towards the bottom is what i think the governor is.
 
http://i249.photobucket.com/albums/gg235/carsrus2/DSC02692.jpg

top view of carb, rusted thing is the throttle valve
This message was modified Dec 5, 2007 by carsrus
Replies: 1 - 2 of 2View as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42