Rohey
Joined: Aug 29, 2007
Points: 1
![]()
|
 |
Replacing primer bulb on Tecumseh
Original Message Aug 29, 2007 2:32 am |
|
What's the best way to do this (Repair Novice). Old bulb has deteriorated into a blob of rubber. From the picture of the replacement part it looks like there is a ring (welch plug) that comes with the bulb. Can I use a pair of needle nose pliers to remove the old one, place the new bulb in place and then push in the new ring....Is that all there is to it?
|
