Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Snowblower guidance (help!)

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
dsharp


Joined: Oct 13, 2006
Points: 18

Snowblower guidance (help!)
Original Message   Oct 13, 2006 3:21 pm
Take pity upon me. I've been lurking here, and I'm looking for some suggestions on a snowblower.

I've narrowed it down to four snowblowers (all around $900 to $1,000):

Cub Cadet, 10 hp, Tecumseh L-head, 28-inch

Husqvarna, 10.5 hp, Tecumseh OHV, 30-inch

Craftsman, 10.5 hp, Briggs OHV, 30-inch

Arien, 9 hp, Tecumseh L-head, 26-inch

The Husq and the Craftsman look to me to be made by the same manufacturers. The Sears guy told me that theirs is made by Murray. Yikes! I actually prefer the first three for ease of use. Of course, I'm aware of the Ariens reputation, though the 9-hp model isn't overly impressive.

Any thoughts? (My driveway is 25 by 50, and I live in Maine. Snowfally can be heavy, but the worst part is the pile at the end of the driveway that's caused by the snow plow!)

Thanks,

David

Replies: 1 - 10 of 34NextNext page of topicsAllView as Outline
jubol


Location: Dover, De
Joined: Oct 3, 2003
Points: 1558

Re: Snowblower guidance (help!)
Reply #1   Oct 13, 2006 4:36 pm
 dsharp,

I would go with either the Huskey or the Ariens!!

I have the Huskey 927STE, which is a 9 HP OHV Tec engine with a 26 inch bite, paid $1050.00 for it.

I paid for a 9 HP engine, but when I checked with Tecumseh with serial numbers, they told me I had an 11  HP engine.

I love the Right and Left triggers for turning, will turn on a dime!!

Also love the Chute controls.

I have only used my blower one time on  4 to 5 inchs of very heavy wet snow.

It was throwing it about 30 to 35 feet!!!

         Hope this helps,

                                       Fred 

Husqvarna STE927(11.5HP) snowblower,  MTD Pro Series 18/42 Lawnmower, MTD 6.5 HP  Self Prop Lawn Mower,  Weedeater 1500 Blower, Web Gensis  2000 
cleblanc


Joined: Oct 3, 2006
Points: 11

Re: Snowblower guidance (help!)
Reply #2   Oct 13, 2006 6:48 pm
I'm also looking at similar snowblowers and my conditions are about the same.  I'm in CT.  However I'm also considering any of the Toro models - love that joystick control.  However, my husband will be using it and he is partial to the Cub Cadet - he likes the size of it.  Any thoughts?    
jubol


Location: Dover, De
Joined: Oct 3, 2003
Points: 1558

Re: Snowblower guidance (help!)
Reply #3   Oct 14, 2006 9:41 am
CLEBLANC,

The Cub cadet blower is to big for home use!!

To big when you store it!.

To cheaply made!!

Go with Ariens, Simplicity, Toro or Husqvarna blowers!!

                                                           Fred 

Husqvarna STE927(11.5HP) snowblower,  MTD Pro Series 18/42 Lawnmower, MTD 6.5 HP  Self Prop Lawn Mower,  Weedeater 1500 Blower, Web Gensis  2000 
dsharp


Joined: Oct 13, 2006
Points: 18

Re: Snowblower guidance (help!)
Reply #4   Oct 14, 2006 10:19 am
IMHO, the Cub has the best controls of the four and seems to be the easiest to use. Also, it has a few stainless parts including the back "scoop" that's likely to come into contact with the pavement.  What are MTD's shortcomings? I'm not lobbying for the Cub, just trying to figure out what makes MTD products so bad.

The Ariens'  controls aren't so great, and at this price range it doesn't have the turning ability of the others with the trigger controls. I've checked out the Toro, but it would cost $500 more for the same horsepower.

On the Husq and Craftsman, I like the idea of an OHV engine. I know the Snow King is tried and true, but a little extra torque and less noise from either the Tecumseh or Briggs OHV would be nice.

Any other thoughts?

jubol


Location: Dover, De
Joined: Oct 3, 2003
Points: 1558

Re: Snowblower guidance (help!)
Reply #5   Oct 14, 2006 4:17 pm
MTD uses a lot of bushings in leiu of bearings!

MTD also uses thinner steel on their blowers, IMHO.

MTD machines are  great where I live , Dover, Delaware, might put 1 to 2 hours of blowing a year on it!!

Put 20 Min's on mine last  snow season.

                                                                     Fred 

Husqvarna STE927(11.5HP) snowblower,  MTD Pro Series 18/42 Lawnmower, MTD 6.5 HP  Self Prop Lawn Mower,  Weedeater 1500 Blower, Web Gensis  2000 
cleblanc


Joined: Oct 3, 2006
Points: 11

Re: Snowblower guidance (help!)
Reply #6   Oct 14, 2006 5:58 pm
I jubol wrote:
CLEBLANC,

The Cub cadet blower is to big for home use!!

To big when you store it!.

To cheaply made!!

Go with Ariens, Simplicity, Toro or Husqvarna blowers!!

                                                           Fred 



I think you're confused on the model.  The Cub Cadet that is $999 is the 528 SWE and is one of the smallest.  That is why my husband like it over the Ariens and Toros - easier to store.  He also likes the big wheels.  It is basically the same model as the Craftsman 88790, only it has larger tires, stainless steel skide plates and shaver plate and is 10HP instead of 9.  I personally would prefer to buy either a Toro 1028LXE or an Ariens 11528LE.  Both are $1399.  Can anyone help me convince my husband why it's worth $400 extra and that this is the better choice?    
dsharp


Joined: Oct 13, 2006
Points: 18

Re: Snowblower guidance (help!)
Reply #7   Oct 14, 2006 9:57 pm
Sounds like cleblanc and I are on the same page... I'm thinking about the $1,399 Arien as well, though its controls aren't as good as the others. Everyone sings the praises of the Arien. Is it worth another $400? (I definitely like the Toro controls, but it's too much $$$ for me.)
dsharp


Joined: Oct 13, 2006
Points: 18

Re: Snowblower guidance (help!)
Reply #8   Oct 17, 2006 7:39 pm
Maybe no one else is thinking of snow blowers right now? Seriously, this is probably a wearisome topic for the old hands around here. Thanks to Fred for responding. Anyone else -- feel free to weigh in. I tend to agonize over big purchases. Heh heh
Indecisive


Joined: Oct 17, 2006
Points: 3

Re: Snowblower guidance (help!)
Reply #9   Oct 17, 2006 10:21 pm
I've been reading the emails here with interest as I'm in the same boat as some others, namely can't make up my mind what to do on snowthrowers.  Having done some research though, I learned that the Craftsman 88790 is made by MTD Manufacturing, which makes Cub Cadet, Troy-Bilt, Yard-Man and Yard Machines.  If you go to the MTD Canada Maufacturing site, you'll see the different logos of their brands, but if you click on the Troy-Bilt and follow the links, you'll see an exact replica of the Craftsman 88790 in there somewhere.  Sears has this blower on sale right now for $850.  Anyway, my indecisiveness has to do with noise, specifically, does anyone have any experience with Briggs Intek OHV being noticeably quieter than a Tecumseh L block or a Tecumseh OHV or even a Briggs non-Intek OHV?  I have my eye on an Ariens 9526 DLE (new for 2007), which has a Briggs Intek, but at $1700, it is exactly double the price of the Craftsman 88790, which has a Tecumseh OHV.  I'm like Sabesh of last year's reviews, where I need to do the chores in early AM or late PM.  Also looking at the Toro 1128 OXE (also $1700) as it has a Tecumseh OHV engine (lower models aren't OHV).  If the noise differences aren't that great between any of the various engines, then I would consider stepping up to name brand quality (Ariens, Toro) but saving some bucks vs the high-end models.  By the way, I have a corner lot with lots of sidewalk that is prone to ice problems, so I was also looking for something that is good at removing ice.  Anyway, thanks for listening, and any advice would be appreciated.
cleblanc


Joined: Oct 3, 2006
Points: 11

Re: Snowblower guidance (help!)
Reply #10   Oct 18, 2006 7:00 am
I think we've finally made a decision.  After spending the last month looking at the Sears models, Cub Cadets, Husqvarnas, Toros and Ariens - we finally decided on the Toro 1028LXE for $1399.

The Sears 88790 for $850 this week was very tempting and the Cub Cadet version for $999 at HD was my husband's favorite for biggest bang for the buck.  We also had a 10% off coupon for HD which would make it only $50 more than the 88790 which would be worth it since you get 10HP instead of 9, and stainless steel skid plates and shaver plate.

But when it came down to it, I wanted to buy from our local dealer and I also preferred either a Toro or an Ariens based on the excellent reputation of both.  So then I was looking at the Ariens 11528LE and the Toro 1028LXE both for $1399.  I chose the Toro for the ease of use of the joystick controls.  Also it has a 5 year warranty on the chute.  I felt if I bought the Sears or Cub Cadet I would have had to buy the 5 year at-home warranty which would have added another $150.  I don't think that's necessary with the Toro.   Plus the dealer will set up and deliver for free.  Sears wants $60 for delivery and HD wants $75 plus $15 for setup.

Another factor in the decision is that Toro is offering 1 year no interest no payment financing right now.        

Replies: 1 - 10 of 34NextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42