Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Damn tree stump...

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
BBgarage


Joined: Dec 6, 2005
Points: 98

Damn tree stump...
Original Message   Mar 14, 2006 5:05 pm
Hey, here is the deal, we have a few tree stumps(a year or so old) in the back. They range from about a foot to 18 inches thick. I want to know the cheapest(rental wise) and best way to get rid of them, and I need them out fast. I was thinking about digging down about 6 inches or so below ground level around the entire thing and just taking a chainsaw to it. If my neighbors didn't care I would just drill some holes, pour some gasoline, and let em burn but that isn't an option, at  least for one of them.

Basically, being 2 years before I leave for the USMC Reserves and then college, I want my final two Halloween displays to get onto TV(have been doing setups since I was about 5). This year I have more people(3-4) and more money, and I decided on making a ride. Anyway, we want the track down by May 1st, and since we are very crammed these tree stumps have to go. You can read more about what I have done, etc, at Halloweenforum.com, my username there is crazymjb.

Mike
Replies: 3 - 12 of 12Next page of topicsPreviousAllView as Outline
oakville


Joined: Dec 6, 2005
Points: 92

Re: Damn tree stump...
Reply #3   Mar 14, 2006 8:13 pm
if you're gonna use a chainsaw, make sure you borrow it from someone you don't like.  cutting roots with a chainsaw dulls the blade incredibly fast.  there is a lot of grit basically sucked into the roots - i expect you'll  need to sharpen it at least once during the process.  once you pay for a professional sharpening twice (once during your project and once before you return the chainsaw to your unsuspecting friend/neighbour), you're probably looking at a cost similar to a stump grinder.  maybe you can get a deal with this being the off-season and all...

the rotting ideas won't work, and i wouldn't count on burning to take it all out.  the only other thing can think of is a shovel and an axe.

good luck.

nibbler


Joined: Mar 5, 2004
Points: 751

Re: Damn tree stump...
Reply #4   Mar 14, 2006 9:13 pm
Having seen what happens when someone who knows what they are doing makes a little mistake I'd hold off on the ANFO "solution" you just might find yourself in a world of hurt.

If you are even resonably careful you can hand sharpen a chain while it is on the saw in a couple of minutes. If you do it at each gas up its only a quick touch up and the chain stays sharp unless you hit a rock or a lot of grit. If you borrow a saw make sure the chain is sharp and the tank is full before you give it back.

If you go here :  http://www.oregonchain.com/tech/manual_maint.htm  you can get all sorts of info on chainsaw chains.

Two other "ideas" occur to me:

1. Instead of digging 6" down add 6" of dirt ;
2. Try to incorporate the stumps into the presentation
spottedpony


Joined: Aug 23, 2004
Points: 301

Re: Damn tree stump...
Reply #5   Mar 14, 2006 9:25 pm
cut close to the ground with a chainsaw then rent a stump grinder
BBgarage


Joined: Dec 6, 2005
Points: 98

Re: Damn tree stump...
Reply #6   Mar 14, 2006 10:47 pm
Thanks. An axe could be used for the roots, but not for the stump. I assume whoever I borrow the chainsaw from will have an axe, so I will borrow one of those too. I was kidding about the ANFO, though it is tempting.

The stump needs to go. We will be putting a track down for a cart(it is going to be a ride through), and that stump is right in the way.

Mike
newtonian


Location: Windsor CT
Joined: Dec 12, 2004
Points: 86

Re: Damn tree stump...
Reply #7   Mar 15, 2006 7:41 am
Got rid of one, granted a smaller one, by boring a series of large holes into it and then attacking it with a coarse sanding tool.   Got it below ground level rather quickly considering.

2012 Ariens ST24DLE
Semi Retired Ariens 9526 in active reserve
Unknown vintage 5HP Ariens to restore

hirschallan


If it aint broke don't fix it !!


Location: Northern Hills of NY
Joined: Aug 25, 2005
Points: 327

Re: Damn tree stump...
Reply #8   Mar 15, 2006 2:43 pm
I was thinking maybe a router set up on a 2X4 frame around the stump and slowly lowering the router to get flush with the ground.

BBgarage


Joined: Dec 6, 2005
Points: 98

Re: Damn tree stump...
Reply #9   Mar 15, 2006 7:44 pm
Not this one. We spent 2 hours today with a drill and a 10 pound metal stamoung tool to cut the smallest root.

My other friend did say he would let me borrow his chain saw.

Mike
BBgarage


Joined: Dec 6, 2005
Points: 98

Re: Damn tree stump...
Reply #10   Mar 15, 2006 7:47 pm
Wow, I botched that.  I meant stamping tool, the ones meant for packing down dirt. This root was about 4 inches by 6 inches.

Mike
power


Joined: Mar 13, 2006
Points: 20

Re: Damn tree stump...
Reply #11   Mar 16, 2006 6:35 am
Try that stump out at home cheapo. It didn't work for me but I used diesel fuel instead of kerosene. I heard it does work well. *
BBgarage


Joined: Dec 6, 2005
Points: 98

Re: Damn tree stump...
Reply #12   Mar 16, 2006 4:19 pm
Problem is, I need it out instantly, I cant wait for some chemicals to work their magic. I was thinking of just dousing it in gasoline and trying to burn it, but its a little close to the fence.

Mike
Replies: 3 - 12 of 12Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42