Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > snowblower starts, but stalls after 20 secs (can't use under load)

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
johnnyz


Joined: Feb 12, 2006
Points: 1

snowblower starts, but stalls after 20 secs (can't use under load)
Original Message   Feb 12, 2006 9:39 pm
hi everybody, another new england type with a non-functional snowblower here.  go easy on me, i grew up in the desert and this is my first winter as a homeowner in a (finally) snow filled state (CT).
so, i got a Toro snowblower from my father-in-law, worked fine 3 months ago even with old fuel in it.  go to use it today and it wouldn't start.  topped it off with fuel that has been sitting in the can for probably 6 months.  i worked for about 20 mins to get it going.  FINALLY got it to start.  there was rejoicing! but not for long!
once running, it would run at "normal" speed, then drop down, almost stall, then rev back up to normal, then drop down to stall, and so on, repeat about 4 times until it would stall on it's own (total run time = 20 seconds or so).  if i put it under load and started blowing snow it stalled in seconds.

-choke and throttle are maxed, if lowered, it instantly stalls.

i'm thinking drain the fuel, clean the carbs, refuel with FRESH gas?

help please!  shovelling a foot of snow on a steep driveway was fun when i got paid to do it years ago as an enterprising teenager.  now it sucks.
Replies: 1 - 2 of 2View as Thread
Replies: 1 - 2 of 2View as Thread
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42