Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Kooky Idea #2

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
drumsonly2002


Joined: Oct 27, 2005
Points: 42

Kooky Idea #2
Original Message   Nov 2, 2005 9:55 pm

 Got snowblower fever and thought I'd modify a used machine is my spare time for the fun of it.  This is a bit kooky but may be fun to see what happens. Thinking of getting a  24" or 25" used Aries, and trick it out by installing an 11hp OHV engine. Goof around with the impeller pulley and hop it up to throw snow further. Can get an aftermarket Honda look alike OHV motor at Princess Auto in Canada for less than 9 hp Honda. Funny thing about these "Powerfist" engines is the remarkable resemblance they have to a Honda.  Side by side comparison with a Honda, the only difference from the outside view, the thing is black, but everything looks EXACTLY like a Honda. The guys at princess told me Honda parts fit this thing. Maybe it has cheap and weaker parts inside. I should of taken a picture and post the two. This winter, for the fun of it, going to trick out a blower. Anyone ever soup up a snowblower? After that, the next is the....lawnmower!

Replies: 1 - 3 of 3View as Outline
Majorxlr8n


Location: Freehold NJ
Joined: Aug 6, 2003
Points: 1092

Re: Kooky Idea #2
Reply #1   Nov 3, 2005 2:05 am
drumsonly2002 wrote:

Can get an aftermarket Honda look alike OHV motor at Princess Auto in Canada for less than 9 hp Honda. Funny thing about these "Powerfist" engines is the remarkable resemblance they have to a Honda.  Side by side comparison with a Honda, the only difference from the outside view, the thing is black, but everything looks EXACTLY like a Honda. The guys at princess told me Honda parts fit this thing. Maybe it has cheap and weaker parts inside.

Drums - don't bother with this engine. I just spent a few days investigating the Lifan engine. It too, is a Honda "clone". Parts support is NIL for them, making them throw-away engines. Yes, some Honda parts MAY fit, but how will you be able to get Honda parts for your "clone"? Honda does NOT have a cross reference! These are offshore, Chinese, cheap copies. Buy one & take your chances IMHO...

Marty

drumsonly2002


Joined: Oct 27, 2005
Points: 42

Re: Kooky Idea #2
Reply #2   Nov 3, 2005 6:43 am
I agree. Honda does not have to clone itself as they have such a heathly market share. Was thinking the same, a cheap copy, like those internet Rolex watches. Looks the same but not inside. If I am going to hop up a blower, gonna do it right. Thanks for the imput.
MissSnowshoveler


If you don't have free speech, what do you have?

Location: NS
Joined: Feb 5, 2005
Points: 706

Re: Kooky Idea #2
Reply #3   Nov 3, 2005 7:54 am
We are a Honda engine dealer and sell the knock offs.  The knock offs are a cheaper engine, and 95% of the parts are interchangable.  If buying this from a non "box" store you'll have much better luck in the parts department.  We've had one on a woodsplitter that we rent out and it's split close to 2000 cord of wood in the last 2 years.  It still runs fine but is starting to feel it's age as did the Hondas after splitting that much wood.  Just know that if you do decide to go this route - make sure that you have a heat box built for it so that it doesn't freeze up.

Sherri

If you don't have free speech, what do you have?
Replies: 1 - 3 of 3View as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42