Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > honda es6500 generator overvoltage

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
sp00ky


Joined: Nov 1, 2005
Points: 1

honda es6500 generator overvoltage
Original Message   Nov 1, 2005 2:30 am
I have a honda 6500 generator that puts out a normal 240 volts most of the time. Recently it will at times jump to 340 volts.  Is there anyone that can recommend the solution ? Thanks
Replies: 1 - 5 of 5View as Outline
MountainMan


Overpowered is Usually Adequate


Location: Connecticut
Joined: Feb 19, 2003
Points: 1564

Re: honda es6500 generator overvoltage
Reply #1   Nov 1, 2005 9:03 am
Off the top of my head, the Voltage regulator could be going.

Ariens 1128PRO- Honda Generator_ Husky 480-257 Jonsered 2050Turbo- Shindiawa T2500 SCAG Mower -little wonder blower-Sears track blower-Coleman Generator- Bombadier ATV-Stihl HS-45 Etc-Etc-Etc
JohnEDavies


Joined: Sep 7, 2004
Points: 177

Re: honda es6500 generator overvoltage
Reply #2   Nov 3, 2005 10:46 am
I believe the regulators in Honda generators are not serviceable - it probably needs to be replaced. Your Honda dealer can diagnose the problem....

It certainly wouldn't hurt to open up the electronics end of the generator for a look. Check for loose or corroded connections Maybe you will get lucky.

John
pyro


Joined: Dec 27, 2007
Points: 2

Re: honda es6500 generator overvoltage
Reply #3   Dec 27, 2007 4:28 pm
If you are mechanically handy, remove the cover on the generator end. Inside on lower left is the automatic voltage regulator (AVR) which is a curved box-looking thing on K2 models, diamond shaped box on earlier models. An output overvoltage is caused by the AVR not throttling the generator field voltage properly. Look toward the top and you will see the brushes in their holder. With the generator running at normal speed (3600-3750rpm), you should be able to measure around 25Vdc with a voltmeter at the connector to the brushes. Any more (and I bet there is), and the AVR is bad.  I had the same problem and I ended up buying a replacement AVR from Plano Power Equipment for just under  $300.00.  Do an internet search to find them.

- Mark
MountainMan


Overpowered is Usually Adequate


Location: Connecticut
Joined: Feb 19, 2003
Points: 1564

Re: honda es6500 generator overvoltage
Reply #4   Dec 27, 2007 8:07 pm
This WAS a 2 year old topic......??

Ariens 1128PRO- Honda Generator_ Husky 480-257 Jonsered 2050Turbo- Shindiawa T2500 SCAG Mower -little wonder blower-Sears track blower-Coleman Generator- Bombadier ATV-Stihl HS-45 Etc-Etc-Etc
larryccf1


Joined: Aug 10, 2008
Points: 1

Re: honda es6500 generator overvoltage
Reply #5   Aug 10, 2008 10:12 pm
curious - i just learned about the ES6500 generator by accident - i have the same 2 cyl engine in a honda garden tractor and it's in relatively new condition (engine and tractor) and was thinking this engine is an ideal candidate for a generator application because of the water cooled factor and how quiet it is as well as the longevity factor to the engine because of lower operating temps

any suggestions for a generator besides the chinese sourced units northern tool sells?

any suggestions appreciated
Replies: 1 - 5 of 5View as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42