Abby's Guide to Hair Loss
Username Password
Home Discussions Reviews More Guides

Member Profile


ExCompost

Name Mark
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 2
Number of Posts 2
Number of Reviews 0
Date Joined Jan 1, 2009
Date Last Access Jan 6, 2009 10:31 pm
ExCompost's last  
Re: Stalling under load; Tecumseh HSK70 7 Hp
#1   Jan 2, 2009 10:47 am
Hi mkd,

Thanks for the advice on positioning the bowl, as I wasn't sure where in relation to the float to put the deep or dented end.

In my earlier question, I was referring to part 11 on the diagram, the fuel well spacer, which appears to be permanently installed in the carb body.  The jet screw and the bowl nut are no problem to remove and clean.  What's your take on using reformulated regular (10% ethanol) or higher octane gasoline, such as we use here in NH?

Re: Stalling under load; Tecumseh HSK70 7 Hp
#2   Jan 1, 2009 11:20 am
Thanks Grump, Frily and everyone else for this thread.  My 20+ yr. old Ariens w/ a 7 hp Tecumseh and bowl carb had the same problem of faltering and stalling under load.  It took a rebuild kit and cleaning of the idle and main jets w/ copper wire to solve the problem, and a cutting and tightening of the governor spring to the throttle plate seemed to help.

One of you mentioned removing the main fuel jet and inspecting it.  Do you mean the passage that runs up the center of the carb body and protrudes into the throat between the choke and throttle plates?  Can that te removed?  If so, please let me know how to do it for future reference.

Do you guys think that 87 octane works ok w/ these older engines, or is mid-grade or premium recommended?   Thanks a lot and Happy 2009.

Hair Loss Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42