Abby's Guide to Hair Loss
Username Password
Home Discussions Reviews More Guides

Member Profile


CraftsmanOwner

Name DKW
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 3
Number of Posts 3
Number of Reviews 0
Date Joined Apr 29, 2012
Date Last Access May 2, 2012 7:09 pm
CraftsmanOwner's last  
Re: Craftsman Lawn Tractor tranny problem?
#1   May 2, 2012 7:09 pm
Yes, my LTX1000 is a hydro transaxle sealed so my understanding is that it cannot be rebuilt. I have used it 12 years on 1-1/2 acres of mostly hills and most fairly steep -usually takes about 2-1/2 to 3 hrs to mow all at same time. It has had wheel weights and chains on it the whole 12 years .  I've kept the oil changed and lubed every year. The hydro tranny is wonderful for hills to adjust the speed according to the condition-up,reverse and turns on the hills. I can't say enough good about this mower. That said I've taken the chance and purchased a used tranny from Florida (no hills) and should receive it soon. i hope that it all works out but still would like all the thoughts anyone may have on my upcoming project. Thanks !
Re: Craftsman Lawn Tractor tranny problem?
#2   Apr 29, 2012 12:38 pm
I have same problem thats been coming on for a a couple of mowing seasons-the whine especially on hills and seems to be loosing some power on hills also (have to move the gear lever forward more now to get the same speed out of the transaxle as I used to). Then recently started getting another noise (it was the fan on top of trans. hitting the support bar sometimes particularly when pulling a loaded trailer). I did have the Sears tech come out who discovered all the above and gave and showed me in my manual and online the p/n for a new one $1000. or rebuilt $650. He was a great guy  full of good info worth every bit of the $96. In the meantime I think I've found another hydro transaxle -used- and am gonna try to install myself bar any real brain puzzlers. The Sears guy said not difficult to replace-disconnect brake and two bolts holds it in place. He said the front bearing was going out allowing the tranny to move upward thus the fan blades hitting the support bar. He showed me the movement of the tranny. But I may also try the other guy's suggestion on here -the drill a hole in top of tranny and ad gear oil first.
 I' m open to any and all suggestions any may want to send my way. I have loved this  hydrostaitic mower for the past 12 years with very little problems with it until the gear lever spring last year and now the showstopper transaxle.  I have very steep hills and about two acres to mow.
 The new models at Sears this year don't reccomend hydro for hills since they dont "pump" the oil to the gears thus good for flat only they say unlike they did when I bought mine in '01. But I think 11-12 years out of my mower is pretty damn good-that's why I hate to give it up for a bright red (yuk) 6 speed with a no mow reverse safety feature and less heavy duty deck and not twin V engine( louder). Send me all the help you fellas wanna tell me 'cause I intend to fix 'er up at this point.
Re: Craftsman Lawn Tractor tranny problem?
#3   Apr 29, 2012 12:14 pm
In my search for the solution to my 20HP  V Twin model 272440  hydro transaxel p/n 166678- buy new lawn tractor (didn't like the new model options),spend big bucks on new or rebuilt replacement or buy a used one online (questionable reliablilty) I have also experienced some of the other problems along with  transaxle probs you guys have discussed on here and would like to offer what has worked for me.
 To the the guy with the won't move forward or backward suddenly problem , I had and resolved the same problem. The gear lever retention spring (not the proprer name of it I'm sure -look for it in your manual's diagram  was replaced and checked the brake adjustment at same time. The problem was that the  tranny belt kept coming off  (thus wouldn't go forward of backward suddenly and it was a real bugger to get off and back on since it jammed under the  the pulley  each time-plus sometimes also damages the belt. So anyway-replaced the spring (you can get a glimpse of it down thru the opening where your  F-N-R gear lever is). After and not until I put back on the wheel weights and the tire chains did it solve the problem immediatly and no problem with it since then.
Hair Loss Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42