Abby's Guide to Credit Cards
Username Password
Home Discussions Reviews More Guides

Member Profile


o2man98

Name Ken
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 5
Number of Posts 5
Number of Reviews 0
Date Joined Dec 2, 2007
Date Last Access Nov 30, 2008 4:31 pm
o2man98's last  
Re: Ariens 926Pro Loosing Drive
#1   Dec 30, 2007 1:08 am
newjerseybt wrote:
Make sure the drive works perfect when the machine is above 32F, 0C, (in a heated garage overnight) and you are NOT blowing snow just to make sure you are on the right track.

I only mentioned this as any diagnosis is only as good as the info supplied.

Yes, it does work perfect when warm and dry. It also works perfect for about the first 10-15 minutes of blowing snow then starts the slipping.
Re: Ariens 926Pro Loosing Drive
#2   Dec 29, 2007 5:04 pm
Snowmann wrote:

I was able to dig these up from my work email. These are for 926,XXX series model numbers only.

52605600          Kit, Engine Baffle  -- All Tecumseh (except 13hp)

52605700          Kit, Engine Baffle – 13HP Tecumseh only

52605800          Kit, Engine Baffle – All Briggs

The install might take 15 minutes if you need one of these, but check those two adjustments first.

PK

Well, I did double check the adjustments and adjusted to the tightside with little if any change. It has been a while since we had blowable snow but we did yesterday. It was fine at first and I was thinking "Great, it is fixed". All of a sudden it started slipping again. Because of the delay I have a feeling it is the water getting on it.

Do you have any instructions on installing this baffle and is it something that Ariens would cover under warranty? The blower was bought new last spring.
Re: Ariens 926Pro Loosing Drive
#3   Dec 2, 2007 11:07 am
Thanks

Do you have any idea of the cost of the first kit?
Re: Ariens 926Pro Loosing Drive
#4   Dec 2, 2007 10:48 am
Paul,

Thanks for the reply. I am actually just east of you in Manitowoc. It was the snow yesterday that gave me the problems although I do remember it happening some last year.

My model number is 926004 S/N 001471.

I look forward to your response on this.

Ken
Ariens 926Pro Loosing Drive
#5   Dec 2, 2007 10:07 am
I have an Ariens 926Pro that is loosing the power to the wheels in all forward and reverse speeds. I will work fine for one push and all of a sudden stop driving. Then it will be back to normal and nothing again.

Any tips and tricks appreciated.

Ken
Credit Cards Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42