Abby's Guide to Credit Cards
Username Password
Home Discussions Reviews More Guides

Member Profile


hvac_01453

Name Mike Malone
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 2
Number of Posts 2
Number of Reviews 0
Date Joined Jan 26, 2009
Date Last Access Jan 28, 2009 5:32 pm
hvac_01453's last  
Re: John Deere 1130 SE
#1   Jan 28, 2009 5:30 pm
Well, I tried to snow blow again today, only this time I thought I would try something EMBRY said... He mentioned trouble started when blowing off to the right, This is my main direction as well. I thought to try blowing to the left as much as possible and it reduced the slippage 70%. Another side note from that was there was 80% less accumalated snow on top the engine this time, a rareity... Looking closer at this I noticed when the impellor discharges the snow,  it rather slings it to the right side a bit, in its natural momentum. Some of it is coming straight up and it is never guided by the chute in its direction because the base of the chute is open... From the operators position, I can see the snow going straight up without touching the chute, this causes the snow to spray about. On the other hand, when discharged to the left it reverses the throwing direction of the snow by the impellor, and  it discharges cleanly. Some kind of sheet metal or plastic colar would likely clean up this spraying of snow all about....your thoughts!!!!!!!!
Re: John Deere 1130 SE
#2   Jan 26, 2009 12:54 am
I too like the most of you picked up the 1130 SE JD from Lowes.  It was setup by the JD dealership. Like mentioned earlier, the cable was loose. I was pissed that it cost be $25  to get it home only to have to pay another $48 for a home service call.  I drove mine about 40' and it stopped. One thing I wasn't use to is all the leakage of snow dusting around the shute. It seems to fly all over the place. Power wise this thing throws my snow into the neighbors yard and sometimes onto their roof.  I ran an Atlas 22" for 15 years without doing anything to it really except shearpins, oil chages... Still has the original belts from 1993, and will run circles around the JD as far as drive goes.

My 1130 SE slipped in forward and reverse after 40' of operation, it remained motionless . I shifted it to higher speeds and side to side motions forward and back then it would start again, but usually only in the higher gears.  JD Dearlership came down adjusted the cable, cleaned off the disc wheel of spent rubber, and adjusted the linkage one spot. Not the way the manual says (3-3.375") of spring stretch. but it ran great while he was here. His testing was always just the drive. Not with the blower throwing snow... Is it possible the thing is forming ice on the traction plate?. How is snow getting in there anyway?  This should be a sealed environment in there anyway, except for maybe a weep hole... I did notice snow flying all around the units shute and thought this odd.  Snow was all over the engine.  This never happened to the old machine.  The dealership was told after the next storm, its doing that slippage again.  He sent the mechanic to change the friction disc.  Next storm,,, same thing. Called JD told him it still slips, mechanic came to house and fiddled with it and told the wife This machine will never drive like the power of the old 5 HP unit I use to have....WHAT!!!!! It sounds like hes throwing up his hands.  I was considering getting a JD tractor, but after this ordeal, I think I'll look to the Japaneese for quality products.  I only bought the JD because of the name, only to find out, they only painted the unit and apply the decals! They better come up with a realistic fix for this quick.. A class action lawsuit looks promising!

Credit Cards Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42