Abby's Guide to Copiers
Username Password
Home Discussions Reviews More Guides

Member Profile


iblackford

Name Ivan Blackford
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 3
Number of Posts 3
Number of Reviews 0
Date Joined Dec 4, 2014
Date Last Access Dec 8, 2014 3:26 pm
iblackford's last  
Re: 15hp honda clone in place of 10hp Tecumseh
#1   Dec 8, 2014 11:31 am
Hi, Thanks, this looks very similar to what I'm going to do, I'll compare my chassis to yours and see if the dimensions are similar. Looks like a pretty slick installation, it must really chuck the snow! :) Ivan
Re: 15hp honda clone in place of 10hp Tecumseh
#2   Dec 7, 2014 10:36 am
This sounds similar to what I'm trying to do, would you have any pictures of your setup that you could post? Specifically I'm curious about how far back the engine has to come, it seems that I could trial and error it a few times, but a starting point would be very helpful. :) Thanks, Ivan
15hp honda clone in place of 10hp Tecumseh
#3   Dec 4, 2014 4:44 pm
Hi All, I have a 32" Sears snowblower frame that used to have a 10hp tecumseh. I got it as the engine had thrown a rod. I purchased a 15hp honda clone that I would like to use in it's place. The nice thing about the clone is that the shaft size is identical, so I can just swap the pulleys over. However, the block mounting dimensions and the shaft height from base is larger on the new engine than the old. I could just start cutting, drilling, and hacking to get it to fit, but does anyone have experience with this swap before that could provide details on the correct method to adapt it to fit? Thanks, Ivan
Copiers Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42