Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I picked up this old 1983 Toro Power Shovel for dirt cheap.  I found some info on the internet, took it apart to inspect/clean/adjust/lubricate.  Put it all back together and gave it a test run.  These things are incredible!  We've had some serious heavy wet snow here recently.  Not real big dumps.  Maybe 3 to 4 inches at a time.  Certainly deep and wet enough to be difficult to shovel.   I bought this thing for clearing off our fairly large deck.  Couldn't be happier with it's performance.  Why Toro ever stop making these with the gas engine is beyond me.   For it's diminutive size, and little 21cc two stroke engine, this thing can move a lot of snow. 

I'm currently on a PC now so things may not be exactly the same on the Mac as I described.  I'll try it later with the Mac and walk you through it.   

I tried all kinds of things to get links working and never was able to.

About a week later I simply pasted a link as text into a post and it showed as a hyperlink.
Now they quit doing it again.

Pictures seem the same way, sometimes it works sometimes it doesn't.

Yeah.... Inconsistency is a major p.i.t.a.  That's for sure. 

I don't have problems with images,  just links.


For those who like two strokes, check this out:

http://www.youtube.com/watch?v=TaL4m0quPIA&feature=related

Not much snow being moved but something to see nonetheless.

Borat, If you can be so kind to send me a pic of the gas cap from your machine (inside view). I have a feeling I'm missing the inside portion of it and it leaks. It just doesn't look right to me. Thanks,Allan

hirschallan wrote:
Mine was defective also.  A picture won't help because I modified it.  The problem is that there should be a little check valve inside the cap.  Mine was missing.  I tried to make a check valve and it was partially effective but not perfect.   If you look at the cap, there are two vent holes.   On my machine, one hole ends up at the top and one at the bottom when the cap is screwed on tightly.  I blocked off the bottom hole with a plug and I don't get any seepage now. 

By the way, new caps are available at Partstree.com for less than $10.00.

I have one of these 38350 models that I bought new back in the '80s. Haven't used it for a number of years and can't get it started. Never stored it w fuel in the tank so should be able to rule out fuel problems; I put in fresh fuel. Haven't opened it up yet. Can anyone tell me if I'll be able to try starting it once I open up the housing or will I have to put it all back together each time I want to try to start it. Anyone know if there are any free downloadable service manuals on this machine. Still looking for one. With small gas-powered machines the problem is almost always in the carburetor or fuel system; that's where I'll look first, plug also of course but have never seen a bad plug in a small gas engine; it's almost always carburetor/fuel problems. This machine served me well, never had any problems with it. Probably haven't used it for over 5 years. When I moved to the country many years ago I bought a Ford farm tractor with 5' rear mount snow blower so haven't used the Toro much since then. It would come in handy around doors etc. if I can get it running. I am aware of the diagrams on Partstree.com. Would be nice to find a service manual though.

https://homeownersolutions.toro.com/portal/server.pt/community/product_center/225

Borat:  What might be an alternate to the shovel is a small Toro PowerLite.  There are 3 and 3.5hp versions, small, rubber auger, have wheels and are fun to use.  They toss 25 feet and can move watery slush or water very well.  Around here they can be had for $20 to $50 almost always with plugged carbs.

Shryp wrote:

Shryp, MANY thanks for that referral. I had checked the Toro web site and even saw that manual but didn't realize it covered my machine. Very good information there. That should get it going for me. Really appreciate your help!

aviator411 wrote:
You can start it with the cover off.  You'll just have to manually move the "on/off" switch by sliding the contact to the "on"  position and work the choke manually.  The carb looks like it could be hard to get at.  Pretty tight in there even for an allen wrench.