Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Replacement snow engine for old Ariens Snowblower - Tecumseh, B&S, Honda?

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
Garandman


Location: South Boston, MA
Joined: Mar 10, 2005
Points: 341

Replacement snow engine for old Ariens Snowblower - Tecumseh, B&S, Honda?
Original Message   Mar 10, 2005 5:12 pm
I have an old Ariens snowblower that is in good shape but with a tired engine. I've been looking into a new replacement. The logical candidates seem to be the Tecumseh OHSK70, the B&S Intek 7.5, and the Honda GX200. 

The Honda seems to have the most torque (10 ft lbs) but is also by far the most expensive - $500 versus around $300 for the other two.

I have never seen a torque figure quoted for the Tecumseh, but it seems like the Intek 7.5 is around 7 ft  lbs?

Another engine that I came across was the Robin Subaru EX series, a 7hp OHC engine that has a lot of advanced features but isn't much more than the B&S or Tecumseh. They all have the same crankshaft (3/4") and height (about 4.17").
B&S sent me data sheets on the replacement: the Honda dealer has an employee who did one; and Tecumseh gave me all the dimensions and concerns (mostly about fitting the chute crank under the engine) but they all seem like they'll work.

I live in Boston MA and the current unit is a Tecumseh H50 on a 1970 Ariens. I checked the compression and it's 65 psi on the first pull and 75 psi after 2 or 3 (by hand pull). I do the sidewalks up and down the street for  some older (or lazier) neighbors so the kids can walk to school without walking in the road. The blower is great because it compacts the snow a bit and the biggest problem here after a snowstorm is finding a place to put it. I've used the unit 8 times so far this season.
This message was modified Apr 22, 2005 by Garandman
Replies: 40 - 43 of 43Next page of topicsPreviousAllView as Outline
Professorpi


Joined: Jul 26, 2007
Points: 16

Re: Replacement snow engine for old Ariens Snowblower - Tecumseh, B&S, Honda?
Reply #40   Nov 8, 2007 10:35 pm
With a 2.5" pulley the impeller runs at 1000rpm, there is a 10:1 ratio for the auger, therefore auger turns at 100rpm. BTW a 3" engine pulley would increase speeds by 20%. probably the max. that can be achieved without too many problems as nibble mentioned above 5" pulley means impeller runs at 2000rpm way too fast. please note that I am no OPE expert.
This message was modified Nov 9, 2007 by Professorpi
tsmagas


Joined: Nov 23, 2007
Points: 33

Re: Replacement snow engine for old Ariens Snowblower - Tecumseh, B&S, Honda?
Reply #41   Dec 1, 2007 6:14 pm
nice
Professorpi


Joined: Jul 26, 2007
Points: 16

Re: Replacement snow engine for old Ariens Snowblower - Tecumseh, B&S, Honda?
Reply #42   Dec 4, 2007 12:06 pm

Dans, how's the engine swap going? I'm curious b/c I'll be doing the same in the spring, in the time being I’m looking on eBay for a good deal on the engine.

Marki86


Joined: Dec 28, 2007
Points: 1

Re: Replacement snow engine for old Ariens Snowblower - Tecumseh, B&S, Honda?
Reply #43   Dec 28, 2007 10:27 pm
Garandman,

Sent you a PM.  Would like to do exactly what you did with your 70's Ariens.

Replies: 40 - 43 of 43Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42