Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Cracked aluminum crankcase repair options?

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
GtWtNorth


https://t.me/pump_upp

Location: https://t.me/pump_upp
Joined: Nov 16, 2008
Points: 264

Cracked aluminum crankcase repair options?
Original Message   Nov 21, 2012 9:50 pm
I picked up a nice clean 3000 watt generator from CL with a small crack in the bottom of the crankcase that allows the oil to drain out slowly (fell off the back of a pickup). Any one have any suggestions/experience for repairs other than welding? I'm hoping maybe Devcon, JB weld or some metal epoxy?
The motor is a clone, Lifan 168F2 196 cc and parts seem to be quite rare. The manufacturer will ship a replacement crankcase for $62.00 + transport, which is probably close to what I would pay to have it welded.
Thanks

https://t.me/pump_upp
Replies: 13 - 22 of 26Next page of topicsPreviousNextNext page of topicsAllView as Outline
hirschallan


If it aint broke don't fix it !!


Location: Northern Hills of NY
Joined: Aug 25, 2005
Points: 327

Re: Cracked aluminum crankcase repair options?
Reply #13   Nov 25, 2012 1:52 pm
I for one would degrease it very well and have a welding shop pre heat with a torch and Heliark weld that sucker. I see no problem at all since I have welded the impossible and still are going strong.

Shryp


Location: Cleveland, OH
Joined: Jul 26, 2010
Points: 532

Re: Cracked aluminum crankcase repair options?
Reply #14   Nov 25, 2012 2:49 pm
Looks to me that the main problem is the mounting configuration. If you do attempt to fix it maybe you can get a sheet of metal or plywood to put under the engine block so you can support the whole thing.
jrtrebor


Location: Michigan - 3 hours north of Chicago on the lake
Joined: Feb 10, 2010
Points: 539

Re: Cracked aluminum crankcase repair options?
Reply #15   Nov 25, 2012 5:55 pm

From the photos there is nothing left strength wise.
There is only one rib left and even that one has a crack by the bolt hole.
Boy, I wouldn't even consider trying any kind of fix other than having it welded.
Any welder that really knows what he's doing and how to mig or tig weld could fix that.
Then I would also as someone suggested redo the mounting. 
If it were me I would mount the engine to a piece of 3/16" plate steel.
Bolt the engine to the plate using the other two currently unused mounting holes
Then remount the engine with the plate attached onto the shock mounts studs.

I've worked on a couple of generators that were mounted like that.
Found it easier to loosen up the shock mounts from the frame as well (all four).
Makes it easier to get them all lined up correctly with the engine mount holes.
If you get them turned even a little off line the shock mounts won't sit correctly
under the engine.  In other words the stud coming off the shock mount won't
be vertical.  It will be leaning one way or the other. 
jtclays


Joined: Aug 7, 2011
Points: 16

Re: Cracked aluminum crankcase repair options?
Reply #16   Nov 27, 2012 7:54 pm
$62 in a heartbeat for me if I was going to use /count on it for service.  Flipping it?,........... JB Weld and see ya later.
niper99


Location: London Ont
Joined: Dec 2, 2007
Points: 354

Re: Cracked aluminum crankcase repair options?
Reply #17   Nov 28, 2012 12:43 am
ONLY option i would do is to braze it with aluminum... u can not mig or tig it because the block becomes inpreganted with oil... ive brazed many many blocks (espically tecumseh with thrown rods) that are still holding up to this day...
jtclays


Joined: Aug 7, 2011
Points: 16

Re: Cracked aluminum crankcase repair options?
Reply #18   Nov 28, 2012 1:58 pm
Niper, Not to be rude, but would you be able to braze this for a customer for less than the $62 crankcase replacement?
GtWtNorth


https://t.me/pump_upp

Location: https://t.me/pump_upp
Joined: Nov 16, 2008
Points: 264

Re: Cracked aluminum crankcase repair options?
Reply #19   Nov 28, 2012 4:34 pm
Thanks for all the help. I got the crankcase open & on first inspection there does not seem to be any cracking on the inside, so it may be going out the drain hole then through the cracks there. I'll try to find a way to test that theory.
My intention was to flip this unit, so I'll probably try lots of JB then bolt a plate to the bottom of the crankcase to prevent the cracks from traveling further & weakening that bad corner. By the way, the supports at the other end broke off completely (by that's a fairly easy repair) so these things are not very robust for use around a construction site.

Cheers

https://t.me/pump_upp
hirschallan


If it aint broke don't fix it !!


Location: Northern Hills of NY
Joined: Aug 25, 2005
Points: 327

Re: Cracked aluminum crankcase repair options?
Reply #20   Nov 28, 2012 5:13 pm
GtWtNorth wrote:
By the way, the supports at the other end broke off completely (by that's a fairly easy repair) so these things are not very robust for use around a construction site.

Cheers


These ope aren't meant to be dropped off the back of a truck either.

GtWtNorth


https://t.me/pump_upp

Location: https://t.me/pump_upp
Joined: Nov 16, 2008
Points: 264

Re: Cracked aluminum crankcase repair options?
Reply #21   Nov 30, 2012 3:29 pm
It seems like I was lucky after all. I filled the cracked oil drain hole with JB weld and buttered up the drain plug before screwing it in. Nnow that it's hardened, the leaking seems to be stopped(knock on wood). The  cracking is limited to the corner base area & didn't propagate through the case.



So I'll close her up & fill with oil to confirm. Let you know how it goes.

Cheers

https://t.me/pump_upp
mkd55


Location: wisconsin
Joined: Dec 16, 2005
Points: 155

Re: Cracked aluminum crankcase repair options?
Reply #22   Nov 30, 2012 3:53 pm
gtwt! you also could jb weld all the wells(valleys) where the cracks are visible in the pics. i filled the whole cavity  adjacent to the drain plug casting.
Replies: 13 - 22 of 26Next page of topicsPreviousNextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42