Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Blower won't move

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
Vangellis


Dream more easy in the chair that really fits you.

Location: Factoryville, PA. (NE PA)
Joined: Oct 1, 2003
Points: 373

Blower won't move
Original Message   Jan 11, 2005 2:32 pm
Hi gang. With more snow coming down right now, I went out to the shed this morning to do a pre-check on the blower to make sure it's ready to go tomorrow morning when I get home from work. Started ok, and ran ok for a couple minutes. Out of nowhere it just stopped going forward or reverse. Auger is working and drive belt is working. It's not making any funny sounds either. I didn't have time to pull the back cover off to check the chains or drive disk yet. I had to eat and now it's off to get some rest for tonight. It's a circa 1990 JD 726. Here's a pic, with my back up next to it if I don't get it running. It's supposed to be another sloppy mix. Snow now, sleet later then rain all day tomorrow. This stuffs no fun!  LOL
                               Any help or what to look for is appreciated,    Kevin




Simplicity Conquest
Replies: 10 - 19 of 28Next page of topicsPreviousNextNext page of topicsAllView as Outline
Vangellis


Dream more easy in the chair that really fits you.

Location: Factoryville, PA. (NE PA)
Joined: Oct 1, 2003
Points: 373

Re: Blower won't move
Reply #10   Jan 13, 2005 2:50 pm
Hi Jubol. I guess  the diff would be what I'm calling a gear case.  LOL  I've stated on the forum before my mechanical knowledge of OPE is limited, but I suprise myself sometimes. Is the pin actually like a shear pin? Looks kind of involved to get the diff apart, but I'll check it out more over the weekend.              Thanks,  Kevin


Simplicity Conquest
SnowPro


Location: Sault Ste. Marie, Ontario, Canada
Joined: Mar 16, 2003
Points: 395

Re: Blower won't move
Reply #11   Jan 13, 2005 3:05 pm
Vangellis wrote:
Hi Jubol. I guess  the diff would be what I'm calling a gear case.  LOL  I've stated on the forum before my mechanical knowledge of OPE is limited, but I suprise myself sometimes. Is the pin actually like a shear pin? Looks kind of involved to get the diff apart, but I'll check it out more over the weekend.              Thanks,  Kevin



Vangellis:  Don't open the differential !!  It is full of gears and with the limited knowledge that you stated, you could create more problems than you need.

What you need is to replace the small roll pins that hold the axle (actually called the differential connecting rod) together.  They are 1/8" x 1" long.  You should need 2 of them.  I keep them on hand always as they have a habit of shearing from time to time. 

From your picture, you can see them at the top of the axle. Drive them out, reconnect your axles and install new ones.  They should be about 10 cents each.  You may need a helper to hold one of the 2 axle/wheel combos to slide the 2 together.

If you need more info, I'll check in later tonight or you can PM me.

HTH

Ken

SnowRemover


Toro 828LXE

Location: Near Albany, NY
Joined: Jan 12, 2005
Points: 139

Re: Blower won't move
Reply #12   Jan 13, 2005 4:39 pm
Get a Craftsman - they won't break down on you.

Now I have no proof of any of this, but hey, no one else does either, so my opinion should be GOLD.

It is hard enough to remember my opinions, without also remembering my reasons for them!
--Friedrich Nietzsche
TheKneebiter


Joined: Oct 22, 2004
Points: 233

Re: Blower won't move
Reply #13   Jan 13, 2005 6:51 pm
after reading your other post and now this post i cant wait for you to get your craptsman snowblower. once you have your first problem you will be right back here crying. now this poor guy is out here trying to get a little help fixing his machine and you felt the need to highjack it for no sane reason SnowRemover wrote:
Get a Craftsman - they won't break down on you.

Now I have no proof of any of this, but hey, no one else does either, so my opinion should be GOLD.
This message was modified Jan 13, 2005 by TheKneebiter


robmints


Joined: May 13, 2003
Points: 4691

Re: Blower won't move
Reply #14   Jan 13, 2005 7:24 pm
SnowRemover wrote:
Get a Craftsman - they won't break down on you.

Now I have no proof of any of this, but hey, no one else does either, so my opinion should be GOLD.

Your opinoin is as golden as anyone elses.
robmints


Joined: May 13, 2003
Points: 4691

Re: Blower won't move
Reply #15   Jan 13, 2005 7:31 pm
Kevin,

Don't over or under estimate your abilities. If you can get that mower deck on and off, you should be able to get some roll pins out and back in. Take your time and look closely, plenty of light. You might need a half way decent drift if it is stuck in the shaft. Luckily you have guys like Snowpro around to help.
Highwind


Despite the high cost of living, have you noticed how it remains so popular.

Joined: Jan 13, 2004
Points: 985

Re: Blower won't move
Reply #16   Jan 13, 2005 8:23 pm
Vangellis wrote:

 

 
      Vangellis,

Am I seeing this correctly? The valve stem is on the inside of the rim? Seems an odd place to put it.                                                 



Honda stable: HS 724 snowblower;  HRS216 lawnmower; BF2 UWWW; 5 HP, 2200 psi/2.9 GPM pressure washer.

Electric: BV2500 B&D Leaf Hog/snow duster; old 12" Weedeater.

nibbler


Joined: Mar 5, 2004
Points: 751

Re: Blower won't move
Reply #17   Jan 13, 2005 8:49 pm
The valve stem mounted on the inside means that  he has 5 or 6 reverse gears and only 2 foward ones.
Highwind


Despite the high cost of living, have you noticed how it remains so popular.

Joined: Jan 13, 2004
Points: 985

Re: Blower won't move
Reply #18   Jan 13, 2005 9:07 pm
nibbler wrote:
The valve stem mounted on the inside means that  he has 5 or 6 reverse gears and only 2 foward ones.



  Wouldn't that make it an older Italian model, WW II vintage?

Honda stable: HS 724 snowblower;  HRS216 lawnmower; BF2 UWWW; 5 HP, 2200 psi/2.9 GPM pressure washer.

Electric: BV2500 B&D Leaf Hog/snow duster; old 12" Weedeater.

Vangellis


Dream more easy in the chair that really fits you.

Location: Factoryville, PA. (NE PA)
Joined: Oct 1, 2003
Points: 373

Re: Blower won't move
Reply #19   Jan 14, 2005 2:37 pm
SnowRemover wrote:
Get a Craftsman - they won't break down on you.

Now I have no proof of any of this, but hey, no one else does either, so my opinion should be GOLD.

Chopper...That be you.   LOL

I picked up some roll pins on the way home from work this morning and will check it out tomorrow after I get home.
Rob, I do ok with the basics, it's just sometimes I don't really know what I'm looking for. Thats why this site is priceless
as "was" WTB. Is it past 3:00PM yet.  LOL The help I get here is great and much appreciated.                                                                                                              Kevin
Oh yeah BTW, that stem is on the inside. It's on the outside on the other tire. Have no idea why. Bought it used.

This message was modified Jan 14, 2005 by Vangellis



Simplicity Conquest
Replies: 10 - 19 of 28Next page of topicsPreviousNextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42