Abby's Guide to Plasma TVs
Username Password
Home Discussions Reviews More Guides

Member Profile


gearman

Name Rudy
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 5
Number of Posts 5
Number of Reviews 0
Date Joined Dec 18, 2008
Date Last Access Jan 11, 2009 11:41 pm
gearman's last  
Re: Snow squirting out front from snowthrower
#1   Jan 11, 2009 1:09 pm
Thanks everyone for the help. Took it to a welding shop and got it welded for $10. Now it
is working fine. Whoo hoo!
Re: Snow squirting out front from snowthrower
#2   Dec 23, 2008 12:09 am
trouts2 was absolutely right. The welded joint on the left side has come off. Question is, is there anything other than welding that might do the trick? I tried locktite high strength threadlocker on the joint, but it looks like there is not enough surface area for it take hold. Could soldering work? I have a small soldering iron that does not seem to be enough to heat the parts to make a good bond. If I get a larger soldering iron, could that work, or welding is the only option? Thanks.
Re: Snow squirting out front from snowthrower
#3   Dec 20, 2008 11:48 am
Thanks David. Maybe it is supposed to be welded but it has cracked. I will try to fix it with liquid weld or something like that.
 
Re: Snow squirting out front from snowthrower
#4   Dec 19, 2008 12:12 pm
Thanks nibbler and pvrp. Yes, I blew the belt by jamming the thrower in a pile of snow. It is turning in the correct direction, but there is a jet of snow shooting out of the bottom left corner. There are two straight metal blades on both sides of the mouth on which the 'spiral crescent'  rubber blades are mounted.  The metal blade on the right seems to be rock solid (I can't move it with hand If I shake it) but the one on the left is slightly loose and can be moved/shaken a bit with hand. I don't know if this is how it is supposed to be or how I can tighten it.
Snow squirting out front from snowthrower
#5   Dec 18, 2008 8:58 pm
Hello, I have an MTD Yard Machines single stage snowthrower,
this model (31AM2N1B700)

http://www.yardmachines.com/webapp/wcs/stores/servlet/product_10451_18503_90854_36257_-1#

When using it, a jet of snow squirts out of the left edge
of the mouth. Some snow goes out from the chute as it is
supposed to, but some just squirts out in front from the left.
Everything appears to be fine, so I cannot make out
why this is happening. So only about half the snow
gets thrown to the side, the other part is just moved to
the front. Recently, the belt broke and I put in
a new one. This started happening after that, so may be
it has something to do with it, but I don't see what. The snow
is squirting out front of the same side as the belt, but the belt
itself and others things seem to be okay. Auger blades look
okay (as far as I can tell). Any ideas? Thank you!
Plasma TVs Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42