Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > shear pin problem

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
lazar099


Joined: Feb 18, 2007
Points: 1

shear pin problem
Original Message   Feb 18, 2007 9:21 pm
Hi - looking for HELP!!

It appears that the shear pin has snapped off of our Craftsman snowblower.  The auger moves freely, however it appears that the rod that comes out of the gear case is stuck/welded or rusted to the auger and when we tap on the hole to force the pin out it seems like we are hitting the rod.  Is it possible that the rod could have shifted from the auger and is no longer lined up with the holes?  

If so, how do we go about fixing something like this??

Thanks so much!!

  

Replies: 1 - 3 of 3View as Thread
Replies: 1 - 3 of 3View as Thread
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42