Abby's Guide to Copiers
Username Password
Home Discussions Reviews More Guides

Member Profile


onlytony

Name TONY
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 2
Number of Posts 2
Number of Reviews 0
Date Joined Oct 27, 2008
Date Last Access Oct 27, 2008 9:18 am
onlytony's last  
Ariens mod# 10970 tractor / sno-thro
#1   Oct 27, 2008 9:18 am
I was getting machine ready for the season and a friend said I needed new bushings for the drive axle,and it was an easy fix. I pulled the short axle off, real easy. The long axle won't come off. I removed all the parts,except the long axle, the large gear, and a bracket from the housing. The long axle is splined into the gear and all efforts have not let me seperate the two. Am I missing something, or is it common for this to happen? I've tried penetrating oil, rust buster, and heat, with no good results. The female splines inside the large gear now slip,so it lools like I'll have to hunt down a new gear. I'm thinking sawzall time. Thanks for your knowledge and help. Tony
Ariens mod# 10970 tractor / sno-thro
#2   Oct 27, 2008 9:18 am
I was getting machine ready for the season and a friend said I needed new bushings for the drive axle,and it was an easy fix. I pulled the short axle off, real easy. The long axle won't come off. I removed all the parts,except the long axle, the large gear, and a bracket from the housing. The long axle is splined into the gear and all efforts have not let me seperate the two. Am I missing something, or is it common for this to happen? I've tried penetrating oil, rust buster, and heat, with no good results. The female splines inside the large gear now slip,so it lools like I'll have to hunt down a new gear. I'm thinking sawzall time. Thanks for your knowledge and help. Tony
Copiers Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42