Abby's Guide to Vacuum Cleaners
Username Password
Home Discussions Reviews More Guides

Member Profile


Marty456TTT

Name Marty Powers
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 3
Number of Posts 3
Number of Reviews 0
Date Joined Jan 30, 2011
Date Last Access Jul 29, 2023 3:11 pm
Marty456TTT's last  
Re: Ariens 932506 8.5 HP Tecumseh lh318sa engine - dripping gasoline
#1   Feb 4, 2011 10:13 am
Perfect !!  I ran the machine for about 10 minutes.  Shut it down and "voila" No Leak !!   Thanks for your expert advice !!  Marty
Re: Ariens 932506 8.5 HP Tecumseh lh318sa engine - dripping gasoline
#2   Jan 31, 2011 9:34 am
Thanks everyone ....  I'll be travelling for a few days and will do as you suggested on Thursday.  I'll post the results.

By the way, the impeller belt was slipping and I found that there was a second mounting point for the idler pulley.  So I moved the idler pulley to the cl;oser in slot and it no longer slips.  I've ordered a replacement belt, but they seem to be on back order everywhere.  I love this machine !!

I was very lucky.  I previously had a Toro 5 HP - it lasted about 20 years and then the worm gear failed.  I found this one on Craigs List last year, a guy was selling it for his father who couldn't handle it any longer - it was a few years old and in perfect condition - $450.00 I think was a bargain !!

Ariens 932506 8.5 HP Tecumseh lh318sa engine - dripping gasoline
#3   Jan 30, 2011 7:06 pm
Can you help ?

I had to replace the shear bolt on the impeller shaft and did so by tiling the blower fully up on its front end.

I noticed later that afternoon that it was slowly leaking gas from somewhere near the carbuerator.

I turned off the gas value and ran it till it stopped thinking that all the gas was used up.

Later today I again noticed a gasoline smell and think it was still coming from the bottom of the carbuerator.  There is a small spring loaded button on the bowl, I pushed the button and a small amount of gas came out - I think it was coming from there.  I think this is to allow someone to fully drain the bowl?

It's never done that before - any thoughts on why it started leaking and how I might fix it (if it's that push pin) or do you think it might be something else?  Your help would be most appreciated.

Vacuum Cleaners Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42