Abby's Guide to Vacuum Cleaners
Username Password
Home Discussions Reviews More Guides

Vacuum Cleaners Discussions

Search For:
DC18


Dyson, Sebo and Bissell user

Joined: Jul 25, 2007
Points: 294

SEBO Vacs
Original Message   Jul 17, 2012 6:24 pm
Hi all Just wondered if anyone knew of anything new on the horizon from SEBO? Will SEBO ever upgrade the X Series or replace it with a completely new model like the C Series canister was replaced by the D Series!? Thanks DC18
Replies: 28 - 29 of 29Next page of topicsPreviousAllView as Outline
CountVacula


Joined: Dec 25, 2014
Points: 278

Re: SEBO Vacs
Reply #28   Dec 27, 2014 1:25 am
In the US house current is normally 110-115 volts, 60 Hz. Wall outlets are normally placed on a 15 amp breaker for fire safety now that Romex and plastic junction boxes seems to be the choice of most builders. Appliances are limited to 12 amps draw, again as a fire safety measure, so figure 1380 watts as a practical upper limit.
CountVacula


Joined: Dec 25, 2014
Points: 278

Re: SEBO Vacs
Reply #29   Dec 28, 2014 12:21 pm
Btw, Kenmore canisters soldiered along with ten foot long suction hoses on much less powerful motors than we are accustomed to today. If the data tags on the inside of their lids is to be believed both sealed suction and airflow of most of their 1970s products measured in the 30's for inches of water lift and CFM yet no one back then seemed to be worried about whether or not those old vacuums could handle four more feet of hose beyond the typical six footer. The ten footer was an extra cost option on any vac that didn't come with one and somehow those weaker vacuums managed the extra four feet without problems. I would dearly love to see a return of the ten foot vacuum hose.
Replies: 28 - 29 of 29Next page of topicsPreviousAllView as Outline
Vacuum Cleaners Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42