Vacuum Cleaners Discussions

1. It isn't fair to judge an older model using the more modern versions - more modern versions that have more or increased features will sway buyers from their favourite model - or the model which has stood the test of time. 7 years in my opinion for a Dyson upright is a long time. Others may disagree.
2. If you have a perfectly working Oreck upright Carmine, that needs something comparatively priced in parts cost and you've owned it for a long time - would you go out and buy the latest Oreck or stick with the old? As someone famous said "if it aint broke, dont fix it.' I think it applies the other way around too - especially if a vacuum cleaner has outlasted expectations or has gone through years of "abuse" due to the amount of traffic dirt it has picked up so far.
   
3. Even if the list of rivals you have listed is endlessly cheaper to buy, there are other Dyson models out there which are, in my opinion are better. These rivals don't have the increased cyclone wear or filters that can be left without cleaning out. The Root Cyclones are far better than the Dual Cyclone method - which companies are now catching up on. 
4. You have changed the subject around to a subjective opinion based on alternatives to replacing the Dyson DC07. The original member posted the query on whether it was worth spending that much money on repair. Yet, unless it has actually undergone the repair and continues to bust up after the repair cost has been paid for, then obviously the model should be replaced. If however it gives perfect performance, then I don't think spending $100 is really that much to complain about. Try $162 to $180 - because that's how much it cost US in the U.K on average to get a vacuum cleaner like the Dyson DC07 repaired.
   

1. It isn't fair to judge an older model using the more modern versions - more modern versions that have more or increased features will sway buyers from their favourite model - or the model which has stood the test of time. 7 years in my opinion for a Dyson upright is a long time. Others may disagree.
2. If you have a perfectly working Oreck upright Carmine, that needs something comparatively priced in parts cost and you've owned it for a long time - would you go out and buy the latest Oreck or stick with the old? As someone famous said "if it aint broke, dont fix it.' I think it applies the other way around too - especially if a vacuum cleaner has outlasted expectations or has gone through years of "abuse" due to the amount of traffic dirt it has picked up so far.
   
3. Even if the list of rivals you have listed is endlessly cheaper to buy, there are other Dyson models out there which are, in my opinion are better. These rivals don't have the increased cyclone wear or filters that can be left without cleaning out. The Root Cyclones are far better than the Dual Cyclone method - which companies are now catching up on. 
4. You have changed the subject around to a subjective opinion based on alternatives to replacing the Dyson DC07. The original member posted the query on whether it was worth spending that much money on repair. Yet, unless it has actually undergone the repair and continues to bust up after the repair cost has been paid for, then obviously the model should be replaced. If however it gives perfect performance, then I don't think spending $100 is really that much to complain about. Try $162 to $180 - because that's how much it cost US in the U.K on average to get a vacuum cleaner like the Dyson DC07 repaired.
   

WRT my 4 year old ORECK XL Classic [this month makes 4 years] belts and bags have been the only expense.  Cost me $150 new, belts are $2 each and are do-it-yourself.  I change every 5-6 months.  Takes less than a minute.  Bags are $1.50 each.  I change every 2 months.  Brush roll is still like brand new.  At this rate, I'll have it 10 years before it may need replacement and it costs now $30 and it's a do-it-yourself repair.   Not the same as a dyson DC 07 repair on a 7 year old dyson for $100. 

Carmine D.

WRT my 4 year old ORECK XL Classic [this month makes 4 years] belts and bags have been the only expense.  Cost me $150 new, belts are $2 each and are do-it-yourself.  I change every 5-6 months.  Takes less than a minute.  Bags are $1.50 each.  I change every 2 months.  Brush roll is still like brand new.  At this rate, I'll have it 10 years before it may need replacement and it costs now $30 and it's a do-it-yourself repair.   Not the same as a dyson DC 07 repair on a 7 year old dyson for $100. 

Carmine D.

Carmine D.

Let me switch gears, no pun intended.  One of the clothes driers my wife and I had in one of our homes was a new SEARS Kenmore.  It was a no frills model that cost $250 in the 70's.  After 5 years, it stopped drying clothes.  I did some detective work and determined that it was the heating element.  My wife called and a repairmen from SEARS/independent appliance tech both wanted $100 for the in-home repair.  I bought the element for $19 OTC from a local parts store and installed myself.  A few more years later, the belt that drove the drum broke.  Tub wouldn't spin.  Again repairmen wanted $100 to fix ion the home.  I bought the belt for $8 and installed myself.  Over the years, the element continued to fail.  Poor design and placement.  Next time it was $39 to buy OTC.  Next time $59.  After 22 years, the element was a special order part andf the local appliance parts store was out of business.  Cost was over $100 to buy.  I chucked it, as you say, and replaced with a new drier for $400.

Carmine D.