Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides

Member Profile


DNK1

Name Steve
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 20
Number of Posts 20
Number of Reviews 0
Date Joined Jan 11, 2006
Date Last Access Jan 2, 2007 9:49 pm
DNK1's last  
Re: No fuel due to fuel cap? Ariens Tecumsen 11.5 hp
#1   Jan 2, 2007 9:36 pm
Might want to replace the cap. Sounds like it's not venting.
Re: No Spark
#2   Feb 21, 2006 1:13 pm
I'm in agreement with snowshoveler, an electronic coil will take away all the guess work and save a ton of time .
Re: husky 254xp chainsaw
#3   Feb 8, 2006 11:24 pm
buddys wrote:
Wondering what is a good compression  for a saw mine seems to be around 50 -55 pounds?


That is not near enough. Should be at least 80psi to run decent.  Normally they are around 100psi to as high as 140psi. Take the muffler off and see if the piston is scored.
Re: Need Help: Wheels get Stuck on a Trusty old Ariens
#4   Jan 29, 2006 11:56 pm
Garandman wrote:
If it's a single belt machine and the auger is engaged and turing, I'd take a look at the friction wheel assembly. It's on a spring loaded carrier and may be hanging up or need adjustment.

This one doesn't have a differential but this is what the old ones look like inside.


The bearing to the left side of the friction wheel looks like it's on an angle or worn out.
Re: Tecumseh Carburetor
#5   Jan 29, 2006 11:44 pm
Just wondering why you would want to change to a bigger carb?      
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42