Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

This unit is NEW used it for about 2 1/2 Hr. Two times while in 1st gear going along it chattered for about 3-4 sec, Then it moved along fine.

Then while I was at the end of the drive w/ 8-10" of snow in 1st gear it stoped moving, The wheel's were not spining it just stoped moving.

I put it to rev. It moved in Rev great, then back to 1st & it went along fine till it did it again.I did the same move Rev went backwards then it was fine again.

I spoke with my dealer he said O just a cable adj. I will send someone to your house to adj it. Well when I got home it was gone. they took it in to make repairs. Just wondering if anyone had this happen to them.

My Dealer seems great he has been in bussiness for a long time My first buy from them, so far GREAT SERVICE.

Brent

Solara  I know this is all easier said than done, telling you to go to the dealer.  The dealers do resort to "you bought it at home depot then get home depot to fix it"  I was a service manager at an auto dealership for a few years, and when we would get a tough sticky repetitive prob, I would have to go to the dealer owner and he would say the same thing.  And he never once got in amy trouble from the manufacturer.

I gave the local dealer a chance on my purchase.    I ran into a great deal, it was anever used end of season left over.  Not a takeback re-furb,  Last year march 8524le, 700 bucks.  I saw it and didn't buy it,  I was driving down the road past this equip place, turned around and went in.  They happened to sell Ariens.  I did not want to use the price against them ..  I told them I was about to purchase a 8524le, would prefer to give a dealer the sale  no price mentioned by me.   I also said I don need it now  I will give you a deposit and I don care if I get it till August,  what is the best price you will give it to me for. (pls note I would have given him more than the 700 depo price)  (figured this would be a win situation for them as I don't think they were going to sell any more SB at that time)  He and manager type whatever  looked it all up  they came back with 1200.  I said are you sure. he said yes that is what the machine is telling me as he pointed to his computer monitor.  .  I turned and walked out. 

So I had to buy from HD  -500 bucks difference  ,  just saw yesterday at HD a 5520 2 stage new for 449.  Is that a sweet  compact and strong built machine..    I could have bought  two SB from HD  and still been ahead of the game. 

Makes you think that the manufacturer sets the price for different markets,  my guess so only certain models sold to HD.  Is it a good practice,  up front they get you,  so I think HD should be responsible for hookin you up with service.  The manufacturer may assume there are less warranty repairs for the trivial stuff, so they pass the savings on to you,  they and you save, fine when it is running.  Can get into a lot of arguments when it isn't during the warranty period. 

Ben07

   

thanx guys. i will think about it and look to see what has to be done to remove the dash.

if the highest gear is thera and if it does engage while moving i may just live w./ it.

solara wrote:

Yes could do that then when the snow quits , truck the whole thing to a dealer at begin of summer.   If you want to make sure it works in 6th gear, just disco the shift rod down at the cotterpin at the case,  just let it hang  start the machine it will automatically seek the highest gear when you engage the left   lever for the self propel.   don think you need to do that cause you were pretty ure the gear box shaft moves down or up (not sure now) a little more when you disco the shift rod as it is the shifter mech that is holding it back from 6th.  By the way I do all my adjustments from down there, take pin out then turn the whole shift linkage rod then just put the cotter pin in a little so i can center the adjustments and check it in different positions like 19 times.  you don have to get that finiky but it is easier than playin around under the dash and you get a direct reference on where the rod thatis going into the tranny is and how much play, further it can go etc.  Much faster if you want to see how your adjustment works while it is running,  turn one more turn then go into 1f and 1r , then turn outer way and check etc.  much faster way to do it and double check and compare slight adjustments.

Ben07 

Solara,

PM sent.

Paul Koltz

Solara

Yes I got it back & so far its working 100%.

IM not sure why they had to keep it for 6 days but it seem to be working Great.

I went out yesterday for about 2 1/2 hr. Now its time to change the oil.

Thanks for all of the great information for everyone. IM sure with everyone here I will keep this machine working for a long time

Thanks

Brent