Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Deere 112L rider hydrostatic transmission makes a clicking noise

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
trouts2




Location: Marlboro MA
Joined: Dec 8, 2007
Points: 1328

Deere 112L rider hydrostatic transmission makes a clicking noise
Original Message   Dec 13, 2015 8:03 am
    The machine won't run so can't be driven.

     If the transmission is engaged the machine cannot be pushed around.

    If the transmission is not engaged the machine can be pushed around but makes a clicking noise which I think
is from the transmission.  
   
    Is there an adjustment or something that would eliminate the noise.  I'm not familiar
with hydros or this machine.   I think on a Honda snowblower the hydro is engaged low to high speed by a lever
on side of the case that runs to the operator console.  If that is similar to the 112L is it possible to have the lever
only slightly engaged to make its gears click?
Replies: 1 - 1 of 1View as Outline
niper99


Location: London Ont
Joined: Dec 2, 2007
Points: 354

Re: Deere 112L rider hydrostatic transmission makes a clicking noise
Reply #1   Dec 19, 2015 2:22 am
l have seen a few transmission where the spider gears are all buggered up (teeth broken) and what not..
Replies: 1 - 1 of 1View as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42