Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Ccr2000 38186

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:

Mikeincalgary

Joined: Jan 15, 2014
Points: 4

Ccr2000 38186
Original Message Jan 15, 2014 7:02 am

Hi having start problems with my toro ccr2000 model 38186 serial 4900000 series. I have read about the stens mega fire fix for the 38180 model. I have taken a look at the toro diagrams and the 38186 model looks like it does not use the toro xstar module that I could replace with the stens part. Is this correct? Thanks

This message was modified Jan 27, 2014 by a moderator

Replies: 1 - 5 of 5

View as Outline

jrtrebor

Location: Michigan - 3 hours north of Chicago on the lake
Joined: Feb 10, 2010
Points: 539

Re: Ccr2000 38186
Reply #1 Jan 15, 2014 8:00 am

Hello
The Toro model that you have does use the module.
It's part # 81-4640. It is shown under the
Recoil Starter Assembly diagram in the parts viewer.
Item #10
I'm guessing that you have already pulled the plug and
checked for a spark?
Checked all the wires and made sure that none have a worn spot
that is grounding out the system?
Unpluged the key switch and checked again for a spark?
Tried another plug?
If you've done all these things, then your module probably is bad.
Stens “MegaFire II” module; part # 440-465
Oregon makes a module as well part #33-053

niper99

Location: London Ont
Joined: Dec 2, 2007
Points: 354

Re: Ccr2000 38186
Reply #2 Jan 15, 2014 5:38 pm

Yes u can replace it with a stens module or any other after market module will work just fine as well..

Mikeincalgary

Joined: Jan 15, 2014
Points: 4

Re: Ccr2000 38186
Reply #3 Jan 16, 2014 10:29 pm

Thanks will be testing things out this weekend

Mikeincalgary

Joined: Jan 15, 2014
Points: 4

Re: Ccr2000 38186
Reply #4 Jan 18, 2014 11:47 pm

Thought I would try firing it up first. Started easy, let it run five min no issue. Shut it down for five min , then started on first. Will try again tomorrow. My guess is operator (wife) error before. It stalled on her after 20 min and she kept priming it - my guess is she really flooded it.

Mikeincalgary

Joined: Jan 15, 2014
Points: 4

Re: Ccr2000 38186 (TOP OF THE WEEK)
Reply #5 Jan 20, 2014 8:13 pm

Spoke to soon. Fired it up the day after . Started backfiring then stalled out. Did that a few times.

Replies: 1 - 5 of 5

View as Outline