Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > rpm governer settings tecumseh 10 hp

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
br2an


Joined: Feb 8, 2005
Points: 2

rpm governer settings tecumseh 10 hp
Original Message   Feb 8, 2005 9:46 pm
Hi

I was wondering how or where I could look up the correct engine speed for the governer on a Tecumseh 10 hp snow blower engine.  It is an older Lawnboy ST1032 model (1980's).  I bought it second hand  a number of years ago and it has always had a tendency to rev higher than other snowblower engines that I see.  It really screams like a devil when opened out (but it is still in one piece after over 15 years with me). 

Thanks

Brian

Replies: 14 - 18 of 18Next page of topicsPreviousAllView as Outline
jubol


Location: Dover, De
Joined: Oct 3, 2003
Points: 1558

Re: rpm governer settings tecumseh 10 hp
Reply #14   Feb 10, 2005 12:28 pm
 Richie,

   Go to :"Small Engine Warehouse" site

You can get an 11 to  13 Briggs OHV for between $350.00 and $450.00.

Much better selection on Snow Engines this fall though.

With a 13 Hp OHV, even with EPA controls,

it  ought to produce at least 10 old fashioned HP!

Sure would make you blower a hot rod!!

                                                               Fred     

This message was modified Feb 10, 2005 by jubol


Husqvarna STE927(11.5HP) snowblower,  MTD Pro Series 18/42 Lawnmower, MTD 6.5 HP  Self Prop Lawn Mower,  Weedeater 1500 Blower, Web Gensis  2000 
Richie


Bring On The White Stuff

Location: Long Island, New York
Joined: Dec 12, 2003
Points: 562

Re: rpm governer settings tecumseh 10 hp
Reply #15   Feb 10, 2005 12:42 pm
Hi Fred,
Believe me, if this engine suffers a catastrophic failure in the future, you can bet I'm going to repower this snowblower with a great engine to compliment all the other great features it has.  At least the best that I'd be able to fit on it without requiring a modification to the sheet metal or polypropylene shrouds.  It would really be something that would not be rated more than what the Tecumseh 11 HP OHV engine can produce, since that is the largest engine you can get on this thing.  I assume that the friction disc and other components are rated to handle up to a certain amount of power, but I'd hate going beyond that, which would be very easy to do. 
This message was modified Feb 10, 2005 by Richie


Richie
Marshall


As Long As There Are Tests, There Will Be Prayer In Public Schools. ;- )

Joined: Sep 16, 2002
Points: 7730

Re: rpm governer settings tecumseh 10 hp
Reply #16   Feb 10, 2005 2:14 pm
Ben ben ben, it's not all about torque, regardless how you word it or how many times you type it.

First of all, it can't be. Without HP in these engines, you get no torque.

Second, every OPE small engine that I know of has a higher amount of torque on larger HP engines.

Third, saying it is all about torque, means exactly that......screw HP, torque is all we need. Not true.

Forth, I am fully aware of what an engine does when it drops RPM's under heavy load, snow is not the only thing that causes that to happen on small engines.

Fifth, I said torque was very important, it's just not all of the equation by any stretch of the imagination.

And, here's an exaggerated example to show what I mean.......Let's say you had a 25 HP V-twin OHV engine on your blower with a relatively low amount of torque, the chances of it bogging down while blowing your driveway are slim to none.

On the reverse side of this.......if you have a 4 HP engine with a relatively high amount of torque you're going to be into that torque all the time and very well may stall out because you don't have enough HP. You need a higher HP engine!

 Yes, I agree torque is very important but it's just not all about torque, it both! 
Ben07


The more you know about something, the more you find there is to know.

Location: Pittsburgh, PA
Joined: Feb 26, 2004
Points: 178

Re: rpm governer settings tecumseh 10 hp
Reply #17   Feb 10, 2005 6:26 pm
Marshall wrote:
 Without HP in these engines, you get no torque.


actually the opposite is true
Horse power is the result of torque.  

Torque is a force

Horsepower is a measurtment of torque doing work over an amount of time.

The opposite is true of your quote.  

Without torque you cannot develope horsepower.

Simple example lets take internal combustion engines out of this.

Lets use an electric motor, why  because an electric motor can produce force without a running start.

Lets say you got a 100 pound object you also have an electric motor that produces and can be measured at 75 pounds of force.   It cannot lift the weight.  It has force but cannot produce any horsepower cause it cannot move it.

"It is torque that moves your car but  it is horsepower that sells it."

"It is TORQUE that makes the world go round."

Ben   

This message was modified Feb 10, 2005 by Ben07


Ariens 8524LE, Toro CCR2000, Jacobsen S-B S-blowers, Generac 10hp Gen-convt. to N.G., 5 L-boys(D's F's &Dura( 74,77,80,88,00), Antiq. 1960 AYP 20 in. mag w 3.5 Tech mower. Ryan/Ryobi gas Trim. AYP 205 gas blwr. Mac c-saw,Toro E-blwr, 2 Weed-E e. stg. trims. outboards, boats, util trail, 2 Jeeps 
Marshall


As Long As There Are Tests, There Will Be Prayer In Public Schools. ;- )

Joined: Sep 16, 2002
Points: 7730

Re: rpm governer settings tecumseh 10 hp
Reply #18   Feb 10, 2005 6:40 pm
I'm not sure I'm smart enough to know what all that means but I know this guy would give his right one for another 1000 of those horsepower things.



Replies: 14 - 18 of 18Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42