Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Have a 1970 7 hp Ariens that doesn't want to go into reverse unless I push down really hard on the shifter - to the extreme of the reverse position.   Sometimes, it also "walks" away a bit when in neutral.

I replaced the shifter assembly last year with one from a junked machine when the plunger was hopelessly seized. 

Could someone tell me where the adjustment for this is?  

when you were looking at the friction wheel did you notice if you could move it without it rubbing on the disc.

sounds like it is adjusted a little tight.if so you only have to back of the adjustment nut a half turn .

might need to check the book on it but the adjustment should be on the left han side near top of rear panel.

later chris