Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Toro Snow Commander In-Depth & Dirtiest Carb Ever

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
superbuick


Joined: Feb 23, 2009
Points: 138

Toro Snow Commander In-Depth & Dirtiest Carb Ever
Original Message   Feb 4, 2010 6:13 pm


Had the chance to work on the rare Snow Commander this week.  A friend purchased it after seeing an old S200 in action and realizing just how awesome Toro Single Stages are - he went all the way to the top of the pile with the Snow Commander and got a great deal on a used one.

This unit had been sitting outside most of its life, and needed some minor repairs, but the owner used it on a grass/dirt driveway, so the paddles are not worn at all, and the unit itself has very little use.  Most of the work required was a result of it sitting outside and/or careless/brutish owner treatment (like breaking the chute adjuster - only a plow horse brute dummy would do that)

Here's the unit after we picked it up:


and the dirt and crud inside as a result of its being used on a dirt and grass parking area:





The primer bulb on this unit had rotted/torn from exposure and while replacing the bulb is easy, what happened as a result of the torn bulb was more labor intensive.  Not only had this owner stored the unit with gas (and left it in there for years at a time), but the torn primer bulb allowed dirt into the carb via the priming tube.  The amount of crud buildup was incredible, but the most amazing part.....IT RAN.  It started on the second pull with year+ old gas and all that crud in there, and ran OK too.  Needless to say I cleaned it and rebuilt it, but I thought it was pretty amazing that it started and ran in this condition:



When the previous owner broke the chute adjuster, he tried to put it back together without the adjusting lever and used the wrong sized hardware to screw it back together.  We had to grind the bolts out because they were stripped/rusted in place.



Once everything was bolted back together, rust removed and some parts repainted, and the overall unit cleaned up (minus the chute adjuster and a new belt - still waiting for those to arrive from RCPW), I decided to take some pics of the unique/previously a mystery to me Snow Commander tilting head chassis.

Here you can see that the unit has FOUR wheels (including 2 really cool looking knobby ones):



The handle/bail, when engaged, tilts the unit forward so that the paddles contact the ground (while lifting up the 2 little wheels underneath) and it then has power-propel like all the traditional Toro single stages.  Here's a shot of the tilting mechanism:



I also took two side shots to show the difference between non-engaged and engaged (sorry for the washed out second picture, but you can clearly see the difference in the attitude of the body):

Non-Engaged

Engaged
And here are two shots of the unit as it sits now cleaned up and waiting for its chute adjuster and new belt:




The unit has 3 paddles on a drum auger instead of the usual 2 on a thin shaft.  In theory it should work great, but I haven't run it in any show yet.  The R*Tek has proven to have plenty of power, so I'm not concerned about the additional width.  Mobility of this unit, factoring in the size, the 4 wheels, and the tilting head, is not as friendly as a traditional Toro single stage, which can be used one-handed like a vacuum cleaner.  It is, however, alot more maneuverable than a 2 stage of any kind, and should work almost as quickly as a 2450/3650/221 chassis single stage unit.  As soon as I get it in the snow, I'll add more to this thread.

Replies: 7 - 16 of 19Next page of topicsPreviousNextNext page of topicsAllView as Outline
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Toro Snow Commander In-Depth & Dirtiest Carb Ever
Reply #7   Feb 15, 2010 12:23 pm
I also have a 2-stage snowblower (32" wide) and I'm finding how much I enjoy using the single stage snowblower.  It is so much more maneuverable and "flickable".  Singles are great for fresh snow up to the intake height, curvy paver walkways, and tight spaces.  The 2-stage usually come out to play for the deep snow and for attacking crusty, frozen, or extremely wet EOD piles.  I also use it when it's blizzard condition outside with heavy wind blow back.  It's very comfortable behind a snowblower with a cab. 

Each have their pros and cons.  I have space in the garage so I'm keeping both.
Paul7


Joined: Mar 12, 2007
Points: 452

Re: Toro Snow Commander In-Depth & Dirtiest Carb Ever
Reply #8   Feb 15, 2010 1:57 pm
aa335 wrote:
I also have a 2-stage snowblower (32" wide) and I'm finding how much I enjoy using the single stage snowblower.  It is so much more maneuverable and "flickable".  Singles are great for fresh snow up to the intake height, curvy paver walkways, and tight spaces.  The 2-stage usually come out to play for the deep snow and for attacking crusty, frozen, or extremely wet EOD piles.  I also use it when it's blizzard condition outside with heavy wind blow back.  It's very comfortable behind a snowblower with a cab. 

Each have their pros and cons.  I have space in the garage so I'm keeping both.

What's the brand and model of your single stage unit.  I have a large 2 stage Ariens and until recently I had an Ariens 7hp single stage machine model 722 EC.  I just got rid of my Ariens 722 because it performed poorly when I used it on any amount of wet snow.  Even 2-3 inches of fresh heavy snow was too much for it.   I love my 2 stage Ariens 11.5 hp machine but Ariens couldn't get their single stage machines right.  Maybe that's why Ariens discontinued the line.  I still like the idea of having both a 2 stage and single stage...but I need to find the right single stage machine.
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Toro Snow Commander In-Depth & Dirtiest Carb Ever
Reply #9   Feb 15, 2010 2:21 pm
I have the Honda HS621.  This model is no longer available for sale new in the US market, but still available elsewhere like Canada.

http://www.youtube.com/watch?v=S_O6g_uHAA4
http://www.youtube.com/watch?v=fVGE5dwn8FY
http://www.youtube.com/watch?v=vzn5DrICZzU&feature=related

The only other single stage snowblower that comes even close in handling slush is the Toro 221Q / 421Q.  I really like this snowblower and may get one soon.  Either one are great machines. 

My neighbor has the Toro 221Q and I have the Honda HS621.  The Toro excel over the Honda in throwing distance, maneuverability, and user friendly features.  The Toro has newer chassis and more efficient curved auger / paddle design that gives it an edge in throwing distance, while the Honda has larger flat paddle center and torquey 4-stroke engine that handles slush and packed snow better.  However, the Honda HS621 is heavy at 100 lbs in weight and does not have the Quick Chute features of the Toro.  The Toro power propel is much more aggressive, requiring you to tip it back a bit to prevent it from going too fast.


This message was modified Feb 15, 2010 by aa335
superbuick


Joined: Feb 23, 2009
Points: 138

Re: Toro Snow Commander In-Depth & Dirtiest Carb Ever
Reply #10   Feb 15, 2010 3:41 pm
John - That measurement is about right for brand new paddles - looks like the guy you bought it from really did barely use it.  Its a nice machine, you'll really like it.

Paul - if you get a Toro 221, you won't look back.  You'll love it.  aa335 and I have discussed single stages quite a bit on this forum.  I've never run an HS621 before, and from what aa335 says, they work great, but don't mistake them with the HS520A/HS520AS.  The HS520A and HS520AS are markedly inferior to the Toro 221/421.  I've used one back to back with a 221. They don't have the commercial grade engine of the 621, and the paddle design is not as efficient and more prone to clogging than the Toro.  In fact - the reason your Ariens 722 was unimpressive was the paddle/auger design.  Other than that, the Ariens had a great, powerful Tecumseh motor, and the rest of the chassis design doesn't affect throwing performance.

The Power Curve augers on the Toro singles are the best design available, and they do actually work as advertised.  I love my 221 and use it even on really big snows (I have a large frame 2 stage as well) because it is powerful and very maneuverable, and easy to use (dont need to man handle it or anything) 
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Toro Snow Commander In-Depth & Dirtiest Carb Ever
Reply #11   Feb 15, 2010 4:50 pm
superbuick wrote:
I've never run an HS621 before, and from what aa335 says, they work great, but don't mistake them with the HS520A/HS520AS.  The HS520A and HS520AS are markedly inferior to the Toro 221/421. 

 In fact - the reason your Ariens 722 was unimpressive was the paddle/auger design.  Other than that, the Ariens had a great, powerful Tecumseh motor, and the rest of the chassis design doesn't affect throwing performance.

The HS621 has little in common with the current HS520.  They only share similar chute design.  I had used the HS520 and it had decent throwing distance in lighter snow, with tighter stream and a bit further throwing distance.  But when the snow got heavy, it quickly lose power and distance.  Also, the HS520 seems to bounce around a lot, vibrated more, and sounded noisier.  The GC160 engine is less powerful and lacks refinement as compared to the GX160 on the HS621.

The only plausible reason for the HS520 existence in the Honda product line is to compete directly in price point with Toro 2450/3650.  Overall, the HS520 isn't bad and better than other brands, except Toro.

Superbuick, funny you should mention that the Ariens 722 had an UN-impressive paddle/auger design.  I thought it was fairly impressive that it was a once piece molded auger, and comes with lifetime replacement policy.  Something just doesn't add up as to why it doesn't perform so well.  I thought it was a robustly built unit with a respectable engine and should perform fairly well too.  Perhaps someone who has owned this unit can chime in.
This message was modified Feb 15, 2010 by aa335
superbuick


Joined: Feb 23, 2009
Points: 138

Re: Toro Snow Commander In-Depth & Dirtiest Carb Ever
Reply #12   Feb 16, 2010 3:58 pm
aa335 wrote:
The HS621 has little in common with the current HS520.  They only share similar chute design.  I had used the HS520 and it had decent throwing distance in lighter snow, with tighter stream and a bit further throwing distance.  But when the snow got heavy, it quickly lose power and distance.  Also, the HS520 seems to bounce around a lot, vibrated more, and sounded noisier.  The GC160 engine is less powerful and lacks refinement as compared to the GX160 on the HS621.

The only plausible reason for the HS520 existence in the Honda product line is to compete directly in price point with Toro 2450/3650.  Overall, the HS520 isn't bad and better than other brands, except Toro.

Superbuick, funny you should mention that the Ariens 722 had an UN-impressive paddle/auger design.  I thought it was fairly impressive that it was a once piece molded auger, and comes with lifetime replacement policy.  Something just doesn't add up as to why it doesn't perform so well.  I thought it was a robustly built unit with a respectable engine and should perform fairly well too.  Perhaps someone who has owned this unit can chime in.


http://www.abbysguide.com/ope/discussions/34631-A-1.html
bulbman2852


Joined: Feb 15, 2010
Points: 22

Re: Toro Snow Commander In-Depth & Dirtiest Carb Ever
Reply #13   Feb 16, 2010 6:52 pm
ok   so i bought a used snow commander=  that was used only 4 times--- and from the condition of the paddles and the machine in general;  I believe the previous owner  only used it  4 times.  So I tried it today-- I am NOT  a happy camper...   I also own a  2450 20"   model  and the 20"  model has never plugged up....Not the same with the  snow commander----I will agree that the snow was wet   and it was not very deep..... but the snow commander plugged up a number of times and only worked ok when I moved very quickly to keep the volume of the snow up

ANy  Ideas-- I really like the extra 4 inches of the commander width,  but  I will resell it  if it can t handle the heavy snow..

John

superbuick


Joined: Feb 23, 2009
Points: 138

Re: Toro Snow Commander In-Depth & Dirtiest Carb Ever
Reply #14   Feb 16, 2010 11:06 pm
John

I ran a Snow Commander today in sticky, wet snow (possibly te same snow as you - I'm located southwest of Boston), and while it worked ok, my Toro 221 QR is better - by quite a bit in my eyes.

The problem with the Snow Commander, in my opinion, is the extra paddle.  The paddles are closer together, and they do not have air space around them because of the drum auger (as opposed to the steel rod type as seen on the 2450/3650/221 )  In super sticky, clumpy snow like we had today, this can cause clogging because the snow has nowhere else to go but up (or forward).  I also noticed that it does not throw as far as the 221 (or even the powerlite).  I also think this has to do with the third paddle.  Some will like to think that the extra width is the issue, but the motor is more than powerful enough (I have the same motor on a 2 stage and it has no issues with bogging down in any type of snow).

Its not bad, its just not as good as the proven 21 inch models.
Paul7


Joined: Mar 12, 2007
Points: 452

Re: Toro Snow Commander In-Depth & Dirtiest Carb Ever
Reply #15   Feb 17, 2010 12:15 am
aa335 wrote:
I have the Honda HS621.  This model is no longer available for sale new in the US market, but still available elsewhere like Canada.

http://www.youtube.com/watch?v=S_O6g_uHAA4
http://www.youtube.com/watch?v=fVGE5dwn8FY
http://www.youtube.com/watch?v=vzn5DrICZzU&feature=related

The only other single stage snowblower that comes even close in handling slush is the Toro 221Q / 421Q.  I really like this snowblower and may get one soon.  Either one are great machines. 

My neighbor has the Toro 221Q and I have the Honda HS621.  The Toro excel over the Honda in throwing distance, maneuverability, and user friendly features.  The Toro has newer chassis and more efficient curved auger / paddle design that gives it an edge in throwing distance, while the Honda has larger flat paddle center and torquey 4-stroke engine that handles slush and packed snow better.  However, the Honda HS621 is heavy at 100 lbs in weight and does not have the Quick Chute features of the Toro.  The Toro power propel is much more aggressive, requiring you to tip it back a bit to prevent it from going too fast.



aa335, the Ariens 722 that I had didn't come anywhere close to throwing heavy snow as well as the Hondas in the those videos. 
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Toro Snow Commander In-Depth & Dirtiest Carb Ever
Reply #16   Feb 17, 2010 2:07 pm
Paul7 wrote:
aa335, the Ariens 722 that I had didn't come anywhere close to throwing heavy snow as well as the Hondas in the those videos. 

That is just surprising.  On paper, the Ariens 722 looks like it should do well.  It is well built and "rated" at 7 HP, 2 more HP than Ariens 522, while using the same exact engine, chassis, and paddles.  Hmm....

Maybe it was purposely crippled so that it won't tank sales on Ariens two stage snowblowers.  Who needs a big Orange when the little Orange can do so well?
Replies: 7 - 16 of 19Next page of topicsPreviousNextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42