Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > drive & driven disc adjustment

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
Robbierogers


Joined: Jul 21, 2006
Points: 2

drive & driven disc adjustment
Original Message   Jul 21, 2006 7:11 pm
I have a rear engine Snapper rider.   I put a new engine on, but can't figure out how to adjust the drive disc correctly.  It will go forward when the shifter is in the first slot, but stops moving forward when I move the shifter forward into the upper slots.  I've tried loosening the drive disc and sliding it down onto the driven disc, but just aren't getting it right.  I'm doing this with the mower tipped up on to its rear, if that matters.
Replies: 2 - 2 of 2Next page of topicsPreviousAllView as Outline
Robbierogers


Joined: Jul 21, 2006
Points: 2

Re: drive & driven disc adjustment
Reply #2   Jul 22, 2006 9:01 pm
Okay, thanks.  Yes, the engine crank shaft is the same, but I hadn't tried adjusting the spring.  I'll try that.  Appreciate the help.
Replies: 2 - 2 of 2Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42