Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Hi folks. I have an Ariens 7524 that I bought in Nov 05. I'm performing some maintenance on it and I had a question about grease. I'm not a grease guy so bear with me.

The manual recommends Stens Hi-temp grease for the zerk fittings and other grease points but I can't find it anywhere in Ontario. Canadian Tire sells a "#2 Lithium" grease in a small tube which is more appropriate for the amount of grease involved here and requires a smaller, cheaper grease gun.

Would it be OK to use the #2 Lithium on the Ariens or would I be better advised to get an official hi-temp grease?

Also, is "lithium" grease the standard grease type that is generally used for everyday stuff?

Thanks for any advice!

Bob

i got the stens from a dealer. expensive. can probably get it via the internet.

after buying it i saw a grease in walmart which ingredients semmed very very close to the stens.

Any high temp grease will work, stens is just a after market parts source. So its just high temp grease with their name on it. Go buy a good high temp grease from anywhere.