Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Tecumseh Snow King Model # ?

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
Garandman


Location: South Boston, MA
Joined: Mar 10, 2005
Points: 341

Tecumseh Snow King Model # ?
Original Message   Aug 4, 2005 6:38 am
There's an engine  for sale on eBay listed as

MODEL: LH358SA ENGINE FAMILY: 5TPXS.3582BF DISP: 358cc The shaft measures 2 1/4 inches in length with a diameter of 3/4 inches.

There is one key slot on this shaft which runs the entire length of the shaft.

Below the shaft the there are numbers stamped into the engine which read "19-0-155", "20"

There are four threaded holes that are 2 1/4 inches from each other and approximately 3 1/4 inches across from each other.

The engine is approximately 14 inches tall, and about 18 x 11 inches.


They don't list HP. Is this a 10hp or?

Replies: 3 - 4 of 4Next page of topicsPreviousAllView as Outline
Garandman


Location: South Boston, MA
Joined: Mar 10, 2005
Points: 341

Re: Tecumseh Snow King Model # ?
Reply #3   Aug 4, 2005 6:30 pm
Just checked with calipers - 1" diameter shaft. Bummer, an 1124 would be a Good Thing....
itzbinnice


Joined: Nov 1, 2002
Points: 85

Re: Tecumseh Snow King Model # ?
Reply #4   Aug 26, 2005 8:29 pm
Sorry with the late post, too late for Ebay. I think the guy did not list the specs correctly. I believe the Snow King engines are 3/4" shaft for 6HP and below, anything above that should be 1".
Replies: 3 - 4 of 4Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42