Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Latest find. John Deere 1032 snowblower. some questions ??

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
TheKneebiter


Joined: Oct 22, 2004
Points: 233

Latest find. John Deere 1032 snowblower. some questions ??
Original Message   Jul 18, 2005 8:18 pm
Today i picked up an older John Deere 1032 snowblower. The unit starts on the first pull and is pretty clean with minimal rust. When you put it in drive it goes with no problem but when you engage the auger there was a terrible noise like a metal grinding. My first thought was the bearing in the auger housing was bad so i removed the tractor from the auger housing. The auger turns smooth and there is no play so that proves the bearing is fine. I found that the idler pully that puts the tension on the belt when you engage the auger is mounted to a little bar that moves up and down and at the bottom there is a weld that holds it to the shaft. The weld has a crack and the idler is off kilter. The brake looks worn like it was not disengaging when it was supposed to so i think that was the loud noise.      The unit seems to be like an Ariens the way it is set up. My questions are, How do i get info on this unit to find out the age ? The only numbers on it are 1032. I am going to weld the pully and try to bend the bar to get it in line with the belts again and replace the belts. The numbers on the old belts are worn so i need info on the unit in order to purchase new ones. I will try and get pics up this week. Thanks in advance for any help.
This message was modified Jul 22, 2005 by TheKneebiter


Replies: 20 - 29 of 29Next page of topicsPreviousAllView as Outline
Vangellis


Dream more easy in the chair that really fits you.

Location: Factoryville, PA. (NE PA)
Joined: Oct 1, 2003
Points: 373

Re: Latest find. John Deere 1032 snowblower. some questions ??
Reply #20   Jul 22, 2005 2:54 pm
Hi Knee. The first snowfall last year was a wet one and it clogged all day. I tightened the belts before that pic was taken. The next two storms after that were wet and I think it only clogged once or twice. Of course this was after I bought a Sno-stick to unclog it. LOL
For now it does the job for me. I'm sure these were made by Ariens.

Jubol, it has been a pretty warm summer here so far. Just looking at that pic cooled me off a little, but I'm in no rush for winter to get here. Think of a scene like this.

Kevin




Simplicity Conquest
Garandman


Location: South Boston, MA
Joined: Mar 10, 2005
Points: 341

Re: Latest find. John Deere 1032 snowblower. some questions ??
Reply #21   Jul 25, 2005 10:23 am
I posted a message on another forum and it was claimed they're made by AYP for Deere?
robmints


Joined: May 13, 2003
Points: 4691

Re: Latest find. John Deere 1032 snowblower. some questions ??
Reply #22   Jul 25, 2005 11:31 am
Garandman wrote:
I posted a message on another forum and it was claimed they're made by AYP for Deere?



I would not know for sure even if the pictures were larger. The new Fronteers might be AYP?

What question did you post on the other forum?

MountainMan


Overpowered is Usually Adequate


Location: Connecticut
Joined: Feb 19, 2003
Points: 1564

Re: Latest find. John Deere 1032 snowblower. some questions ??
Reply #23   Jul 25, 2005 12:46 pm
From memory, and maybee SNowmann knows, But deere for a long time was Genuine Deere, then Ariens was making the Deere line, now Frontier ( For Deere) is made by Murray.

Ariens 1128PRO- Honda Generator_ Husky 480-257 Jonsered 2050Turbo- Shindiawa T2500 SCAG Mower -little wonder blower-Sears track blower-Coleman Generator- Bombadier ATV-Stihl HS-45 Etc-Etc-Etc
bontaiJoe


If it's free, it's for me!

Location: Saylorsburg, PA
Joined: Jun 4, 2004
Points: 424

Re: Latest find. John Deere 1032 snowblower. some questions ??
Reply #24   Jul 25, 2005 1:58 pm
MountainMan wrote:
From memory, and maybee SNowmann knows, But deere for a long time was Genuine Deere, then Ariens was making the Deere line, now Frontier ( For Deere) is made by Murray.


It is my understanding the above is correct, except with Murray now in bankruptcy, I don't know the future of the relationship, but that wont affect who made machines in the past.

"Man's mind stretched to a new idea, never goes back to its original dimension." -Oliver Wendell Holmes
Garandman


Location: South Boston, MA
Joined: Mar 10, 2005
Points: 341

Re: Latest find. John Deere 1032 snowblower. some questions ??
Reply #25   Jul 25, 2005 2:36 pm
I asked, "Do they make their own, or are they OEM'd?"

Got two answers:

- "Ariens made them for a few years but did not supply JD with the sweeper attachments."

- "I forget who makes them for JD though. I believe it is AYP."


snowshoveler


tides in dirts out surfs up

Location: bridgewater nova scotia...aka the swamp
Joined: Jan 3, 2003
Points: 1261

Re: Latest find. John Deere 1032 snowblower. some questions ??
Reply #26   Jul 25, 2005 6:19 pm
yours looks very much like the ariens built unit.

somewhere in that timeframe ,perhaps a bit later deere sold a unit that looked very much like a roper blower.it was also a tank not to be confused with some of the more modern ...ah stuff.

from there they progressed to somthing made by ..you guessed it MTD and from there i just dont know.

they are just different enough that its hard to get parts for them.(the mtd one that is)

i have noticed that the older ones with the rounded front on the auger housing seem to be the ariens built or engineered units.

the control panel or dash is its own design but it does work real well.

in my opinion they are a KEEPER.

later chris

 

craftsman 10/28 snowblower with tracks   husky 372xpg chainsaw   sachs dolmar bc212 bushsaw   mondo trimmer   monster tractor with trailer    cheep wheelbarro and couple shovels and a partridge in a pear tree 
Thoughtful


Joined: Oct 16, 2007
Points: 1

Re: Latest find. John Deere 1032 snowblower. some questions ??
Reply #27   Oct 16, 2007 7:25 pm
TheKneebiter wrote:
Today i picked up an older John Deere 1032 snowblower. The unit starts on the first pull and is pretty clean with minimal rust. When you put it in drive it goes with no problem but when you engage the auger there was a terrible noise like a metal grinding. My first thought was the bearing in the auger housing was bad so i removed the tractor from the auger housing. The auger turns smooth and there is no play so that proves the bearing is fine. I found that the idler pully that puts the tension on the belt when you engage the auger is mounted to a little bar that moves up and down and at the bottom there is a weld that holds it to the shaft. The weld has a crack and the idler is off kilter. The brake looks worn like it was not disengaging when it was supposed to so i think that was the loud noise.      The unit seems to be like an Ariens the way it is set up. My questions are, How do i get info on this unit to find out the age ? The only numbers on it are 1032. I am going to weld the pully and try to bend the bar to get it in line with the belts again and replace the belts. The numbers on the old belts are worn so i need info on the unit in order to purchase new ones. I will try and get pics up this week. Thanks in advance for any help.



Auger noise:

My auger drive belt was in good condition, but streached.  This allowed the break to wear and grind on the drive pulley.  I replaced the belt and the noise went away.

skane1


Joined: Oct 18, 2010
Points: 18

Re: Latest find. John Deere 1032 snowblower. some questions ??
Reply #28   Oct 18, 2010 8:56 am
Hi..

I have the same issue with my John Deere 1028 I pick-up for  $200 and when I took it to the local small engines guy out here he quoted me $350 to get it  functional again.My unit has the 10 hp Tecumseh engine and I was told that it was 20 years old.Should I spend the money to repair the unit???It runs fine and not much rust but the drive gear box and the auger gear are shot not to mention I need new skid pads etc. 

royster


" It is the use of power tools that separates man from animals"

Location: New Brunswick, Canada
Joined: Feb 11, 2011
Points: 284

Re: Latest find. John Deere 1032 snowblower. some questions ??
Reply #29   Feb 25, 2011 3:15 pm
Garandman wrote:
I asked, "Do they make their own, or are they OEM'd?"

Got two answers:

- "Ariens made them for a few years but did not supply JD with the sweeper attachments."

- "I forget who makes them for JD though. I believe it is AYP."



I realize that many things have changed over the years since this post,but now (2010-2011 ) John Deere snowblowers are  built by Briggs and Stratton,  Briggs took over a number of brands including, John Deere, Simplicity, and Snapper , also Murray when they got into financial problems. Many of the models that they build under different names are nearly identical except for their color.

Replies: 20 - 29 of 29Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42