Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I need to get myself some Lock Tight. More spacifically, the blue glue kind that you can break if you need to. My problem is, I don't know where to buy this stuff online. Can someone give me a link to a website that sells Lock Tight?

Termy you can buy it at any auto parts or hardware store. It would save you the shipping cost which would be about what the lock tight cost.

As mentioned, "Loctite" is available at almost all hardware and auto parts stores. There are several grades depending upon whether you want the parts married or just living in sin....
Even the tiny size lasts quite a while.  Auto parts stores often have other brands as well. But if you need to buy it online that's how the brand name is spelled.

In a jam, you can use fingernail polish if it doesn't see much heat. Not as good as the real thing but will hold until you can get the right stuff. I learned that from a gunsmith/outfitter that occasionally had to lock down loose scope mounts in the field on a client's rifle.

Thanks guys, I went down to my local Napa autoparts store and bought my self some red locktight. They call the stuff Permatex though. Anyway, what I needed to do was get some locktight on the handle bar bolts that the knobs tighten on my new mower. The vibration of the engine was causing the knobs to loosen all the way until they fell off. And this had happen two times already where I almost ran them over! So, hopefully the Permatex will hold.

Let us know how it works. 

Dont use red if ya ever wanna get it off!!!  Permatex red is for permanent locking in high heat situationssuch as a motor mount on a car.  If the screw your using it on has a screw head, you will never get it off.  nut head, w/ a torch and some leverage on socket wrench, you'll probably be able to crack it.  Often the bolt just sheers irtself in half instead of coming loose.   Use BLUE only for what you are doing.  If your auto part store doesnt have blue, go else where, or tell them to get w/ the program, and get some!!

Also if you went there and asked for blue and they sold ya red, the guy at the Napa should be slapped!!!  Show him the difference by putting some Permatex Red in his ignition switch.  

Termy, unless I'm mistaken, that engine shouldn't vibrate enough to do that, hand tightened is all they should need.

Mine doesn't do that, but what about a lock washer under the knob instead of loctite??

I know what you are saying Marshall. I do know the difference between the blue, red, and green. Here is the thing, I will never need to remove or fold the handles so I was fine with that. But, if for some for seeable reason I need to remove the handles some day, all I have to do is heat it up to around 400 to 500 degrees. But, seriously, I don't think I am ever going to do that. Plus, I only put 4 drips of that stuff on the entire bolt so I may be able to get it off with heavy mussle power which I do have lol.