Abby's Guide to Copiers
Username Password
Home Discussions Reviews More Guides

Member Profile


tkrotchko

Name Tom Krotchko
Email Address private
AIM
YIM
ICQ
Gender Male
Age
Location Maryland
Personal Quote
Privileges Normal user
Rank
Points 143
Number of Posts 143
Number of Reviews 0
Date Joined Feb 9, 2010
Date Last Access Apr 12, 2014 6:46 pm
tkrotchko's last  
Re: Question on Honda GX340 engine
#1   Apr 11, 2014 9:35 pm
MN_Runner wrote:
My GX270 (Honda HS 928WAS) takes about 1.2 Qts of Mobil 1 5W-30. I change the oil and spark plug every other year. I would just fill the oil until it looks full on the stick


Yeah, the design of the engine looks to me like it's impossible to overfill unless you put the whole snowblower on a hill. I put in 10-30, and a magnetic dipstick, I'll run it a few minutes each week to cycle the oil through the summer, catch any remaining metal, and I have Mobil 1 5-30HM (high mileage) oil that I'll put in before winter. People have told me the high mileage synthetic is more appropriate for this engine in a snowblower. I don't see a downside to it.
Question on Honda GX340 engine
#2   Apr 11, 2014 8:42 pm
I was changing oil on a GX340 engine on my snowblower. The manual says it holds 1.1 quarts of oil (which I read as about 35 ounces) Yet, the manual also shows that you fill up the crankcase until it's touching the threads for the dipstick. This is pretty common in the GX line (same in the GX160). However, if you add 1.1 quarters, the oil comes halfway up the dipstick, nowhere close to the threads. If you fill it until it reaches the threads, it's closer to 1.4 quarts, or 45 ounces. I am frankly baffled by how much oil this engine needs. Thoughts? Also, this winter is the first the engine has really worked for more than an hour, and when I changed the oil, I could see flecks of metal (microscopic) glinting in the sun. I am inclined to add a magnetic drain plug to the machine, and was wondering if anyone had any opinions on doing this.
Re: Chainsaw Looking to buy
#3   Mar 20, 2011 8:30 am
I agree its almost a religious debate, but the one saw I like is my 14" echo, very easy to start after 15 years, and its so light that you would feel comfortable using it even if you were in a tree cutting branches. Have other echo equipment too; the hall mark of all of them is lightness for the function/power.
Re: Honda 1132 - changing oil confusion
#4   Mar 13, 2011 8:05 pm
I looked and saw the drain on the "other" side; the difference is they don't have the "extender" on that side to drain. But now it makes perfect sense. I just don't understand why the capacity isn't the capacity, but I'm not going to worry about. I've drained the carb, changed the oil, sprayed off the blower, and I'll end up pushing it to the back of my garage. BTW, if you wet the floor of your garage, you can slide the Honda like its on ice skates.
Re: Honda 1132 - changing oil confusion
#5   Mar 13, 2011 4:59 pm
Thanks for the quick replies; at least I know I'm not going crazy. Did you notice the two oil filler holes? I realize they probably have it both sides for different applications, but perhaps the directions should be clearer?
Copiers Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42